DSpace@İnönü

Başlık için Araştırma Çıktıları | Wos listeleme

Başlık için Araştırma Çıktıları | Wos listeleme

Sırala: Sıra: Sonuçlar:

  • f((a,b)) (3,2,1)-structures on manifolds 
    Gok, M; Kilic, E; Ozgur, C (2021)
    In this paper, we define and study two new structures on a differentiable manifold called by us an f((a,b)) (3, 2, 1)-structure and a framed f((a,b)) (3, 2, 1)-structure as a generalization of some geometric structures ...
  • F-B-convergence and a generalization of Knopp's core 
    Cakan, C; Kasap, Z (2010)
    In this paper, based on F-B-convergence, we introduce the F-B-core of sequences of complex numbers and determine a class of matrices A for which the F-B-core(Ax) is a subset of Knopp's core for all bounded sequences x.
  • f-KENMOTSU MANIFOLDS WITH THE SCHOUTEN-VAN KAMPEN CONNECTION 
    Yildiz, A (2017)
    We study 3-dimensional f-Kenmotsu manifolds with the Schoutenvan Kampen connection. With the help of such a connection, we study projectively flat, conharmonically flat, Ricci semisymmetric and semisymmetric 3-dimensional ...
  • Fabric Defect Detection Methods for Circular Knitting Machines 
    Hanbay, K; Talu, MF; Ozguven, OF; Ozturk, D (2015)
    In this paper, an online fabric defect detection system that can detect fabric defects which may occur during the fabric product in knitting machines is introduced. This system mainly includes three steps: 1) Construction ...
  • Fabric defect detection systems and methods-A systematic literature 
    Hanbay, K; Talu, MF; Ozguven, OF (2016)
    This paper presents a comprehensive literature review of fabric defect detection methods First, it briefly explains basic image acquisition system components such as camera and lens. Defect detection methods are categorized ...
  • Fabrication and electrochemical performance of Ho-substituted C/LiFePO4: 
    Altin, S; Yolun, A (2021)
    Ho-substituted C/LiFePO4 samples were successfully fabricated, and their structural properties were examined by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) ...
  • Fabrication and electrochemical properties of LiCo1-xRuxO2 cathode 
    Oz, E; Demirel, S; Altin, S (2016)
    LiCo1-xRuxO2 (where x - 0.0-0.5) are prepared by conventional solid-state reaction technique. The effect of Ru substitutions on the structural properties and electrochemical performance of LiCoO2 cathode materials is ...
  • Fabrication and properties of (Hg0.8Re0.2)Ba2Ca2Cu3Ox superconducting 
    Yakinci, ME; Aksan, MA; Balci, Y (2005)
    Approximately 50 mu m thick epitaxial c-axis orientated (Hg0.8Re0.2)Ba2Ca2Cu3Ox superconducting., films have been prepared on MgO(100) substrates using a spraying process and post-Hg-vapour annealing. The effects of the ...
  • Fabrication and properties of superconducting single crystal 
    Altin, S; Yakinci, ME; Aksan, MA; Balci, Y (2007)
    Superconducting single crystal Bi-2212 (micro)whiskers have been fabricated by annealing a glass Bi2Sr2Ca2Cu3Ox precursor. The T, and T-zero of similar to 20 mm long and 10-70 mu m wide single crystal whiskers were found ...
  • Fabrication of (BiGaPb)2Sr2Ca2Ca2Cu3O10+y glass-ceramic superconductor 
    Yakinci, ME (1996)
    Glass samples with a nominal composition of B1.2Ga0.4Pb0.4Sr2Ca2Cu3O10+y were prepared as rods having a diameter of 13mm and 20cm long by melt casting technique. Sintering process was performed by applying a direct current ...
  • Fabrication of BSCCO Films on SrTiO3 Substrates Using Ultrasonic Spray 
    Turkoglu, S; Aksan, MA (2013)
    In this study, the BiSrCaCuO (Bi-2212) films on SrTiO3 substrates were fabricated using an ultrasonic spray pyrolysis technique (USP). Structural, electrical, magnetic, and critical current density, J(c), properties of the ...
  • Fabrication of Ca-Mn-Nb-O compounds and their structural, electrical, 
    Oz, E; Demirel, S; Altin, S; Altin, E; Baglayan, O; Bayri, A; Avci, S (2018)
    CaMn1-xNbxO3-delta (0 <= x <= 1) were synthesized by conventional solid state reaction method. The structural properties were determined by FTIR, Raman, XRD, XAS measurements. The FTIR and Raman modes change by increasing ...
  • Fabrication of Ca-Mn-Nb-O compounds and their structural, electrical, 
    Oz, E; Demirel, S; Altin, S; Altin, E; Baglayan, O; Bayri, A; Avci, S (2018)
    CaMn1-xNbxO3-delta (0 <= x <= 1) were synthesized by conventional solid state reaction method. The structural properties were determined by FTIR, Raman, XRD, XAS measurements. The FTIR and Raman modes change by increasing ...
  • Fabrication of Cr doped Na0.67Fe0.5Mn0.5O2 compounds and investigation 
    Altin, E; Altundag, S; Altin, S; Bayri, A (2019)
    The main purpose of the study is to investigate the battery properties behind the electrical and magnetic properties. The first part of the study is about the fabrication of Cr-doped Na0.67Fe0.5Mn0.5O2 and the structural ...
  • Fabrication of electrospun polycaprolactone/chitosan nanofiber-modified 
    Topsoy, OK; Muhammad, F; Kolak, S; Ulu, A; Gungor, O; Simsek, M; Koytepe, S; Ates, B (2022)
    In the present study, a screen-printed electrode for Diazinon (DZN) detection was modified with nanofibers prepared via electrospinning technique. The chemical structure, morphology, and crystallinity of the nanofibers ...
  • Fabrication of NdCeCuO and effects of binding agents on the growth, 
    Altin, S; Aksan, MA; Turkoglu, S; Yakinci, ME (2011)
    NdCeCuO superconducting samples were fabricated using ethyl alcohol, acetone and ethylenediaminetetraacetic acid (EDTA) as binding agents. For evaporation of binding agents, the samples were heat treated at 1050 degrees C ...
  • Fabrication of Novel Geopolymer Grout as Repairing Material for 
    Kantarci, F; Maras, MM (2022)
    In this study, a new grouting composite, called geopolymer grout, with high compressive strength (> 107 MPa, cured at ambient conditions) was developed and injected into damaged reinforced concrete (RC) beam. This investigation ...
  • Fabrication of Oleic Acid Grafted Starch-based Hybrid Carriers for 
    Hafizosmanoglu, G; Ulu, A; Koytepe, S; Ates, B
    In this study, artificial red blood cells (RBCs) for immobilization of l-asparaginase are developed. The artificial red blood cells are prepared via a self-assembly method and characterized by various methods. The prepared ...
  • Fabrication of single crystalline Bi-2212 whisker with addition of Sb2O3 
    Altin, S; Aksan, MA; Yakinci, ME (2011)
    Single crystalline Bi-based superconducting whiskers have been fabricated from a melt quenched Bi2SbSr2Ca2Cu3Ox. precursor using suitable heat treatment cycles. Whiskers fabricated in this study have 6-15 mu m thickness, ...
  • Fabrication of single crystalline Bi-2212 whiskers from Ga added 
    Altin, S; Aksan, MA; Yakinci, ME (2012)
    In this study, Bi-2212 superconducting whiskers have been fabricated by annealing a melt quenched Bi2GaSr2Ca2Cu3Ox precursor. Whiskers with 6-15 mu m thickness, 60-95 mu m width and 3-9 mm length were obtained. Crystallization ...