Atalay, S.Ripka, P.Bayri, N.2024-08-042024-08-0420100304-88531873-4766https://doi.org/10.1016/j.jmmm.2010.02.018https://hdl.handle.net/11616/95032In this study, the coil-less fluxgate properties of the as-cast and annealed amorphous wires with the composition (Co0.94Fe0.06)(72.5)Si12.5B15 were investigated. As its name implies, a coil-less fluxgate is a new type of magnetic-field sensor without a coil. When the wire is periodically saturated in a magnetic field in the circumferential direction with a 30 kHz, 62 mA driving current under a 16.5 pi rad/m torsional strain, there is a linear variation in the second harmonic of the voltage from the wire ends as a function of the applied external DC magnetic field along the length of the wire. Current-stress annealing of each sample improved the sensitivity of the coil-less fluxgate sensor. This is the first time that it has been shown that a linear change in the output of the coil-less fluxgate sensor. This is the first time that it has been shown that a linear change in the output of the coil-less fluxgate sensor can be obtained using torsion annealed wire without the necessity of twisting the wire during measurement. We showed that the linear operating range of the sensor can be increased by increasing the demagnetization factor in the sensing direction, so that the coil-less fluxgate sensor can be miniaturised just by reducing the wire length. (C) 2010 Elsevier B. V. All rights reserved.eninfo:eu-repo/semantics/closedAccessCoil-less fluxgateAmorphous wireMagnetic field sensorArticle322152238224310.1016/j.jmmm.2010.02.0182-s2.0-77952103063Q2WOS:000277241600029Q2