Golgiyaz, SedatTalu, Muhammed FatihOnat, Cem2024-08-042024-08-0420190016-23611873-7153https://doi.org/10.1016/j.fuel.2019.115827https://hdl.handle.net/11616/98887This paper presents an experimental study on flue gas temperature (FGT) and emissions estimation in home-type nut coal-fired burner. The proposed method does not require prior knowledge of Charge-Coupled Device (CCD) camera features. Therefore, it can be applied easily without costly and complex adaptation requirement to control the combustion process. In the proposed system, the flame image was taken with a CCD camera. At the same time, reference temperature and emissions were taken with flue gas analyzer. Combustion characteristics were extracted by image processing techniques from each two-color channels of the flame image. When the features were obtained, instead of converting the flame image to grayscale and obtaining the general features, local feature extraction was preferred from each of the two-color channels that express the combustion process better. For this process, the image was divided into local windows and individual features for each two-color channel was extracted. The optimum number of windows was decided by experimental investigation. The features were obtained by using the spectral norm of the region of interest. The obtaining image features were used to train the Artificial Neural Network (ANN) regression model which predicted the FGT and emissions. Estimation accuracy (correlation coefficient (R)) of developed FGT prediction model is 0.99. The emission prediction models estimate SO2, O-2, NOx, CO2 andCO emissions with R = 0.97, R = 0.96, R = 0.77, R = 0.96, and R = 0.87 accuracies, respectively. The experimental results show that the FGT and emissions can be estimated by the flame image.eninfo:eu-repo/semantics/closedAccessFlame imageCoal-fired boilerFlue gas temperature estimationEmission estimationArtificial neural network regression modelArticle25510.1016/j.fuel.2019.1158272-s2.0-85069870727Q1WOS:000479141700009Q1