Kaya, O. A.Kaleci, D.Sahin, A.2024-08-042024-08-0420111063-77101562-6865https://doi.org/10.1134/S1063771011020217https://hdl.handle.net/11616/95319Design of different type of transducers to enhance image quality by forming narrow beams at the principals of nonlinear acoustics is considered in the paper. Thus, the nonlinear pressure fields of elliptical and rhomboid transducers were simulated in three dimensions. The simulation method presented in this study is based on Aanonsen's model for circular sources, and closely follows the model that recently explored for the nonlinear wave propagation due to square and rectangular sources in three dimensions [Kaya et al. Pressure field of rectangular transducers at finite amplitude in three dimensions, Ultrasound in Med. Biol., vol. 32, no. 2, pp. 271-280, 2006]. It is assumed that elliptical and rhomboid sources are plane sources, and driven at 2.25 MHz fundamental frequency. Typical results of nonlinear acoustical pressure field simulation are presented there in three dimensions for elliptical and rhomboid sources and compared with the results for rectangular source. The similarities and differences between the nonlinear pressure field of rectangular, elliptical and rhomboid sources are discussed. The numerical results show that diffraction effects and acoustical beam cross section depend on the source geometry a lot. It is noticeable that the nonlinear pressure field of a rectangular source has a broader beam profile than elliptical and rhomboid source.eninfo:eu-repo/semantics/closedAccessUltrasonic TransducersBeamsPistonArticle57212713510.1134/S10637710110202172-s2.0-79955854214Q2WOS:000288897800002Q3