Study of efficiency of turbines with differing diameters of solar chimney energy systems
Küçük Resim Yok
Tarih
2024
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Techno-Press
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Solar Chimney Power Plants (SCPP) consist of three main components: solar collector, chimney and turbine. Air under the collector is heated by the greenhouse effect, the air density is reduced and the air flows toward the chimney located at the center of the collector. Thus, electricity is produced at the turbine mounted at the entrance of the chimney. In this study, measurements have been carried out on the Solar Chimney Power Plant (SCPP) system built at Ad & imath;yaman University Campus area, with specifications 15 m in height, 0.8 m in diameter of chimney, 0.004 m thick transparent glass floor and a collector having maximum of 27 m in diameter. For this purpose, air flow rate and temperature in the chimney at certain times of the day, ambient temperature, ambient wind speed, ground temperature heated by the greenhouse effect of the collector, temperature and air velocity under the collector, the number of revolutions of turbines of different diameters and Ad & imath;yaman solar radiation values were evaluated. In this study, it has been determined that solar radiation, ambient temperature, chimney height and diameter, solar radiation absorption rate of the ground under the collector are the parameters that affect the efficiency performance of the system. It is also observed that temperature and air velocity at the point where the turbine assembly is located are maximum. In addition, it was determined that the turbine model with a diameter of 0.8 m was the most efficient model for the system. It is concluded that Solar Chimney Power Plant (SCPP) can be considered as alternative energy sources for Ad & imath;yaman.
Açıklama
Anahtar Kelimeler
efficiency, solar chimney power plants, solar power, wing models
Kaynak
Advances in Energy Research
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
9
Sayı
1