EXPERIMENTAL AND NUMERICAL EXAMINATION OF THE WEAR BEHAVIORS OF AA 7075 ALLOY COATED WITH Al-SiC BY USING HOT PRESS SINTERING METHOD

Basit Öğe Kaydı
dc.authoridBallikaya, Hasan/0000-0001-5484-0214
dc.authorwosidBallikaya, Hasan/AAO-7378-2020
dc.contributor.authorBallikaya, H.
dc.date.accessioned2024-08-04T20:54:27Z
dc.date.available2024-08-04T20:54:27Z
dc.date.issued2023
dc.departmentİnönü Üniversitesien_US
dc.description.abstractThis study was carried out to improve the surface of the AA7075 alloy, which does not resist wear. Therefore Al-SiC composite layer on the surface of AA 7075 material was coated with Al+5vol.% SiC powders under 600 degrees C and 100, 120, 140MPa pressure by the hot pressing sintering method. The microstructure of the transition zone between the coating and the substrate material was analyzed by using optical microscopy (OM), energy dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) techniques. In addition, XRD measurement and microhardness of the coating layer were obtained. Coating surface was also subject to linear reciprocating wear test and coe +/- cient of friction (COF), wear volume, and mass loss were detected. The results have shown that micro-pores between Al and SiC powders reduced by increasing the pressing pressure. However, although there was a reduction in wear volume and mass loss, microhardness values dramatically increased. Wear test was modeled in ANSYS 2021 R2 package program depending on Archard's law and numerical analysis was conducted. As a result of the experimental results and numerical analysis, the volume loss values occurring in the coating area were found to be compatible with each other.en_US
dc.identifier.doi10.1142/S0218625X23500373
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-85162062707en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://doi.org/10.1142/S0218625X23500373
dc.identifier.urihttps://hdl.handle.net/11616/101414
dc.identifier.volume30en_US
dc.identifier.wosWOS:000989172900001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review and Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectUniaxial hot pressingen_US
dc.subjectAl-SiC MMCen_US
dc.subjectAA 7075 coatingen_US
dc.subjectbehavior and simulation of wearen_US
dc.subjectFEMen_US
dc.titleEXPERIMENTAL AND NUMERICAL EXAMINATION OF THE WEAR BEHAVIORS OF AA 7075 ALLOY COATED WITH Al-SiC BY USING HOT PRESS SINTERING METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu