Burr Measurement Method Based on Burr Surface Area

Basit Öğe Kaydı
dc.authoridbahçe, erkan/0000-0001-5389-5571
dc.authoridÖzdemir, Burak/0000-0002-5870-0398
dc.authorwosidbahçe, erkan/AAQ-3631-2020
dc.authorwosidÖzdemir, Burak/AAB-6654-2020
dc.contributor.authorBahce, Erkan
dc.contributor.authorOzdemir, Burak
dc.date.accessioned2024-08-04T20:47:24Z
dc.date.available2024-08-04T20:47:24Z
dc.date.issued2021
dc.departmentİnönü Üniversitesien_US
dc.description.abstractOne of the major issues of drilling operations pertains to the formation of burrs, which greatly influences the accuracy of the manufactured parts, and, thus, the capability to meet the desired performance of the part. To remove or prevent these burrs, their geometry must be measured accurately, even though they are sharp and irregular in shape. The accurate measurement of the geometry of a burr will lead to the development of a proper deburring method. In this work, the authors describe a simple and convenient new measurement technique for drilling burr profiles and a developed drilling burr measurement system based on surface area. The new method presented in this research aims at providing a comparative evaluation of the height, arc length and area of the burr, as well as its geometrical characteristics. When the average height and arc length measurement methods are compared with the area measurement method, large deviations in burr height are detected. In particular, these deviations increase more in non-uniform burrs. In the measurement of burr size, the new developed method is based on area measurement and is carried out using a computer. Therefore, there is no deviation between the measurements. In contrast, the average deviation ranges for the height and arc length measurement methods are found to be 9.94-48.14% and 6.07-18.82%, respectively.en_US
dc.identifier.doi10.1007/s40684-020-00228-0
dc.identifier.endpage1296en_US
dc.identifier.issn2288-6206
dc.identifier.issn2198-0810
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85086095024en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1287en_US
dc.identifier.urihttps://doi.org/10.1007/s40684-020-00228-0
dc.identifier.urihttps://hdl.handle.net/11616/99342
dc.identifier.volume8en_US
dc.identifier.wosWOS:000537646700001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherKorean Soc Precision Engen_US
dc.relation.ispartofInternational Journal of Precision Engineering and Manufacturing-Green Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBurr measurementen_US
dc.subjectDrillingen_US
dc.subjectSurface areaen_US
dc.titleBurr Measurement Method Based on Burr Surface Areaen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu