Mechanical behavior of single-lap and double-lap adhesive joined composite parts

Basit Öğe Kaydı
dc.authoridSÜLÜ, İsmail Yasin/0000-0002-2648-6294
dc.authorwosidSÜLÜ, İsmail Yasin/ABH-1342-2020
dc.contributor.authorSulu, Ismail Yasin
dc.date.accessioned2024-08-04T20:44:19Z
dc.date.available2024-08-04T20:44:19Z
dc.date.issued2017
dc.departmentİnönü Üniversitesien_US
dc.description.abstractThe composite parts bonded with embedded single lap joint (SLJ) subjected to tensile load were analyzed previously. The embedded adhesive was applied between two composite parts and the mechanical behavior of the joint was examined. In this study, composite parts bonded with single-lap joint (SLJ) and double-lap joint (DLJ) subjected to tensile load were analyzed by using 3D finite element method (FEM). The advantages of two different joint methods were investigated. In the analysis, the composite parts were carbon/epoxy (AS4/3501-6) with different fiber orientation angles and the adhesive was DP 410. The models for the numerical analyses were generated by using the ANSYS software package. The finite element analyses (FEA) were carried out to predict the failure loads. Stress in x-, y-, z-directions, shear stresses and the von-Mises stresses on adhesive were obtained at time of failure for predetermined parameters. Consequently, the effects of orientation angles, overlap dimensions and joining methods were examined. The most effective parameters and joining process were determined for composite parts with single-lap and double-lap joints.en_US
dc.identifier.doi10.3139/120.111070
dc.identifier.endpage1026en_US
dc.identifier.issn0025-5300
dc.identifier.issue11-12en_US
dc.identifier.scopus2-s2.0-85042909418en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1019en_US
dc.identifier.urihttps://doi.org/10.3139/120.111070
dc.identifier.urihttps://hdl.handle.net/11616/98178
dc.identifier.volume59en_US
dc.identifier.wosWOS:000415695900011en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectJoint designen_US
dc.subjectcompositeen_US
dc.subjectfinite element analysisen_US
dc.subjectstress evaluationen_US
dc.titleMechanical behavior of single-lap and double-lap adhesive joined composite partsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu