Investigation of structure and mechanical properties of copper-brass plates joined by friction stir welding

Basit Öğe Kaydı
dc.contributor.authorErdem, Mehmet
dc.date.accessioned2024-08-04T20:40:08Z
dc.date.available2024-08-04T20:40:08Z
dc.date.issued2015
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, copper and brass plates of 3-mm thickness were joined by friction stir welding at three different rotation rates and traverse speeds. The goal of this study is to determine weldability and mechanical properties of welded copper and brass plates. In order to determine the mechanical and microstructure properties of these plates, microhardness, tensile, bending, optical microscope, scanning electron microscope, and X-ray diffraction examinations were made. The following results were obtained; due to dynamic recrystallization effect, the grains in the stirred zone became fine. Microhardness values of the stirred zone were observed between 87 and 255 HV. According to the X-ray diffraction results, no phase transformation was observed in the stirred zone. In the stirred zone, a small tunnel-shaped joint defect was observed. It was determined that when heat input decreased, the mechanical properties and microstrain increased.en_US
dc.description.sponsorshipInonu University [2011/110]; Rectorate of Inonu Universityen_US
dc.description.sponsorshipThis research is financially supported by Inonu University Scientific Researches Projects with number 2011/110. I thank to the Rectorate of Inonu University for their support.en_US
dc.identifier.doi10.1007/s00170-014-6387-1
dc.identifier.endpage1592en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue9-12en_US
dc.identifier.scopus2-s2.0-84925493914en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1583en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-014-6387-1
dc.identifier.urihttps://hdl.handle.net/11616/96721
dc.identifier.volume76en_US
dc.identifier.wosWOS:000349776600009en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFriction stir weldingen_US
dc.subjectMechanical propertiesen_US
dc.subjectRecrystallizationen_US
dc.subjectXRD analysesen_US
dc.titleInvestigation of structure and mechanical properties of copper-brass plates joined by friction stir weldingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu