Mechanical behavior of composite parts adhesively jointed with the insert double-lap joint under tensile load

Basit Öğe Kaydı
dc.authoridSÜLÜ, İsmail Yasin/0000-0002-2648-6294
dc.authorwosidSÜLÜ, İsmail Yasin/ABH-1342-2020
dc.contributor.authorSulu, Ismail Yasin
dc.date.accessioned2024-08-04T20:44:24Z
dc.date.available2024-08-04T20:44:24Z
dc.date.issued2018
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this paper, composite parts jointed with insert double-lap joint (DLJ) subjected to tensile load were analyzed by using 3-D finite element method (FEM). In the analysis, the composite parts were carbon/epoxy (T 700) with different fiber orientation angles and the adhesive was DP 410. The models for the numerical analyses were generated by using the ANSYS 14.5 software package. The finite element analyses (FEA) were carried out to predict the failure loads. Stress at x, y, and z directions; shear stresses; and the von-Mises stresses on adhesive were obtained at the time of the failure for predetermined parameters. Consequently, the effects of orientation angles, overlap widths and length, and adhesive layer were examined. The most effective parameters were determined for composite parts adhesively bonded with the double lap joint.en_US
dc.identifier.doi10.1007/s40194-017-0543-9
dc.identifier.endpage413en_US
dc.identifier.issn0043-2288
dc.identifier.issn1878-6669
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85044119560en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage403en_US
dc.identifier.urihttps://doi.org/10.1007/s40194-017-0543-9
dc.identifier.urihttps://hdl.handle.net/11616/98201
dc.identifier.volume62en_US
dc.identifier.wosWOS:000429384400018en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofWelding in The Worlden_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectJoint designen_US
dc.subjectStress analysisen_US
dc.subjectCompositeen_US
dc.subjectFinite element analysisen_US
dc.subjectNon-linear analysisen_US
dc.subjectAdhesive jointen_US
dc.titleMechanical behavior of composite parts adhesively jointed with the insert double-lap joint under tensile loaden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu