3 BOYUTLU YAZICIDA ABS VE PLA FİLAMENTLER İLE FARKLI TABLA VENOZUL SICAKLIKLARI KULLANILARAK ÜRETİLEN ÇEKME TESTNUMUNELERİNİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI

dc.contributor.authorKamer, Muhammed Safa
dc.contributor.authorTemiz, Şemsettin
dc.date.accessioned2022-12-06T07:21:27Z
dc.date.available2022-12-06T07:21:27Z
dc.date.issued2021
dc.departmentİnönü Üniversitesien_US
dc.description.abstract3B yazıcı ile üretilen ürünlerin çeşitli parametrelere göre mekanik özelliklerinin tespit edilmesi, bu ürünlerinkullanılacakları yerlere göre üretim parametrelerinin seçilebilmesi açısından önem kazanmaktadır. Bu çalışmada;Ultimaker 2 Extended 3B yazıcıda ABS (Akrilonitril Bütadien Stiren) ve PLA (Polilaktik Asit) malzeme ile farklıtabla ve nozul sıcaklıkları kullanılarak çekme test numuneleri üretilmiştir. Tabla ve nozul sıcaklıklarının mekaniközellikler üzerindeki etkileri araştırılmıştır. Üretilen numunelerin kütleleri, sertlikleri, yüzey pürüzlülükleriölçülmüş ve üretilen numunelere çekme testi yapılmıştır. 3B yazıcı ile üretilen çekme numunelerininboyutlandırılmasında ASTM D638-14 standardı kullanılmıştır. Yapılan testler sonucunda ABS ve PLAmalzemelerin her ikisinde de farklı tabla sıcaklıklarının kütle, sertlik, yüzey pürüzlülüğü, çekme dayanımı veuzama bakımından çok fazla bir etkisinin olmadığı belirlenmiştir. Ayrıca ABS ve PLA malzemelerle üretilençekme numunelerinde nozul sıcaklığının düşmesiyle kütle, üst yüzey sertlik ve çekme dayanımı değerlerininazaldığı, aritmetik ortalama pürüzlülük değerlerinin arttığı, alt yüzey sertlik ve uzama değerlerinde ise kayda değerbir değişimin olmadığı tespit edilmiştir.en_US
dc.description.abstractIt gains importance to determine, the mechanical properties of the products produced with 3D printer according tovarious parameters, in terms of choosing the production parameters according to the places where these productswill be used. In this study; tensile test specimens have been produced on the Ultimaker 2 Extended 3D-printer withABS and PLA material using different bed and nozzle temperatures. The effects of bed and nozzle temperatures onmechanical properties have been investigated. Masses, hardness, surface roughness of the produced samples havebeen measured and tensile test has been performed on the produced samples. The ASTM D638-14 standard hasbeen used for sizing the tensile specimens produced with 3D-printer. As a result of the tests, it has been determinedthat different bed temperatures did not have much effect in terms of mass, hardness, surface roughness, tensilestrength and elongation in both ABS and PLA materials. In addition, it has been determined that the mass, uppersurface hardness and tensile strength values decreased, the arithmetic average roughness values increased, and therewas no significant change in the lower surface hardness and elongation values with the decrease of nozzletemperature in the tensile samples produced with ABS and PLA materials.en_US
dc.identifier.citationKAMER M, TEMİZ Ş (2021). 3 BOYUTLU YAZICIDA ABS VE PLA FİLAMENTLER İLE FARKLI TABLA VENOZUL SICAKLIKLARI KULLANILARAK ÜRETİLEN ÇEKME TESTNUMUNELERİNİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI. KSÜ Mühendislik Bilimleri Dergisi, 24(4), 341 - 358.en_US
dc.identifier.endpage358en_US
dc.identifier.issn1309-1751
dc.identifier.issue4en_US
dc.identifier.startpage341en_US
dc.identifier.trdizinid507398en_US
dc.identifier.urihttps://hdl.handle.net/11616/85598
dc.identifier.urihttps://search.trdizin.gov.tr/yayin/detay/507398
dc.identifier.volume24en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isotren_US
dc.relation.ispartofKSÜ Mühendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.title3 BOYUTLU YAZICIDA ABS VE PLA FİLAMENTLER İLE FARKLI TABLA VENOZUL SICAKLIKLARI KULLANILARAK ÜRETİLEN ÇEKME TESTNUMUNELERİNİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASIen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
document - 2022-12-06T102117.379.pdf
Boyut:
1.85 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.71 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: