EFFECT OF PRINTING SPEED ON FDM 3D-PRINTED PLA SAMPLES PRODUCED USING DIFFERENT TWO PRINTERS

Basit Öğe Kaydı
dc.contributor.authorKamer, Muhammed Safa
dc.contributor.authorTemiz, Şemsettin
dc.contributor.authorYaykaşlı, Hakan
dc.contributor.authorKaya, Ahmet
dc.contributor.authorAkay, Orhan Erdal
dc.date.accessioned2024-08-04T19:51:37Z
dc.date.available2024-08-04T19:51:37Z
dc.date.issued2022
dc.departmentİnönü Üniversitesien_US
dc.description.abstractToday, 3D manufacturing technologies are shown as candidates to replace traditional manufacturing technologies. In this direction, many studies are carried out to reduce the disadvantages of 3D manufacturing technologies. The first few of these disadvantages are; high production cost, slow production speed, and lower strength values of the produced product compared to traditional methods. Increasing or decreasing the printing speed, which is one of the 3d production parameters, appears as a parameter that will directly affect the strength and production costs of the produced product. For this reason, it is important to determine the effects that may occur on the mechanical properties of the product produced by changing the printing speed in terms of choosing the printing speed according to the intended use of the product. In this study, the effect of desktop Fused Deposition Modelling (FDM) 3D printing speed on mechanical properties was investigated. Tensile test samples were produced using Polylactic Acid (PLA) material at seven different printing speeds using two different 3D printers operated without bed heating. The mass, hardness, surface roughness, and porosity values of the produced samples were determined. Fractured surfaces of the samples were analyzed using Scanning electron microscopy (SEM) images. The results show that an increase in the printing speed decreases the mass, the top surface hardness, and the tensile strength and increases the porosity, the arithmetic average roughness of the products produced with both 3D printers.en_US
dc.identifier.doi10.46519/ij3dptdi.1088805
dc.identifier.endpage448en_US
dc.identifier.issn2602-3350
dc.identifier.issue3en_US
dc.identifier.startpage438en_US
dc.identifier.trdizinid1151251en_US
dc.identifier.urihttps://doi.org/10.46519/ij3dptdi.1088805
dc.identifier.urihttps://search.trdizin.gov.tr/yayin/detay/1151251
dc.identifier.urihttps://hdl.handle.net/11616/89099
dc.identifier.volume6en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofInternational Journal of 3D Printing Technologies and Digital Industryen_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleEFFECT OF PRINTING SPEED ON FDM 3D-PRINTED PLA SAMPLES PRODUCED USING DIFFERENT TWO PRINTERSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu