Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method
Küçük Resim Yok
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Today, 3-dimensional (3D) printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling (FDM) method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters (1.75 mm and 2.85 mm) with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.
Açıklama
Anahtar Kelimeler
Kaynak
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
13
Sayı
3
