EXPERIMENTAL INVESTIGATION ON THE EFFECT OF PLUNGING PIPE DIAMETER CHANGE IN CYCLONES TO THE PERFORMANCE OF CYCLONES

Basit Öğe Kaydı
dc.contributor.authorBalikci, Aysegul
dc.contributor.authorKoca, Tarkan
dc.date.accessioned2024-08-04T20:54:55Z
dc.date.available2024-08-04T20:54:55Z
dc.date.issued2023
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, in the cyclone designed according to the high-efficiency Stairmand model, three different immersion pipe diameters, four different flow rates, and two different samples were used to examine the pressure loss and dust holding efficiency that affect the cyclone performance. Cyclone separators are fixed-part devices used in the process of separating particles from the gas by forming vortexes with a gas stream containing solid particles. In cyclone separators, the parameters that have the most significant impact on their performance are dust collection efficiency and pressure loss. In this study, temperature measurement with thermocouple and pressure measurement with digital pressure measurement device were made at the inlet and outlet parts of the cyclone. Dust retention efficiency was calculated by the ratio of the weight of the dust entering the cyclone to the weight of the dust accumulated in the dust collection chamber at the end of the experiment. In addition, the obtained data were analyzed by means of SOLIDWORKS FLOW simulation program and compared with the experimental study. The best result in dust retention efficiency in the coal sample was obtained with 374.85 m3 per hours flow rate and 0114.3 mm plunge pipe diameter. In the biomass sample, the best dust holding efficiency was obtained with an 088.9 mm plunge pipe diameter at a flow rate of 374.85 m3 per hours.en_US
dc.identifier.doi10.2298/TSCI221107116B
dc.identifier.endpage4679en_US
dc.identifier.issn0354-9836
dc.identifier.issn2334-7163
dc.identifier.issue6Aen_US
dc.identifier.scopus2-s2.0-85178997852en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage4665en_US
dc.identifier.urihttps://doi.org/10.2298/TSCI221107116B
dc.identifier.urihttps://hdl.handle.net/11616/101706
dc.identifier.volume27en_US
dc.identifier.wosWOS:001112197700001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherVinca Inst Nuclear Scien_US
dc.relation.ispartofThermal Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectcycloneen_US
dc.subjectplunge pipe diameteren_US
dc.subjectpressure lossen_US
dc.subjectefficiencyen_US
dc.titleEXPERIMENTAL INVESTIGATION ON THE EFFECT OF PLUNGING PIPE DIAMETER CHANGE IN CYCLONES TO THE PERFORMANCE OF CYCLONESen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu