Bond Strength of Resin Cement to Yttrium-Stabilized Tetragonal Zirconia Ceramic Treated with Air Abrasion, Silica Coating, and Laser Irradiation

Basit Öğe Kaydı
dc.authoridAKYIL, MUSA SAMIL/0000-0003-1013-0012
dc.authoridBAYINDIR, FUNDA/0000-0001-5699-2879
dc.contributor.authorAkyil, Musa Samil
dc.contributor.authorUzun, Ismail Hakki
dc.contributor.authorBayindir, Funda
dc.date.accessioned2024-08-04T20:32:40Z
dc.date.available2024-08-04T20:32:40Z
dc.date.issued2010
dc.departmentİnönü Üniversitesien_US
dc.description.abstractObjective:The purpose of this study was to evaluate the shear bond strength of a resin cement to yttrium-stabilized tetragonal zirconia (Y-TZP) surfaces treated with air abrasion, silica coating, or CO2, Er:YAG, or Nd:YAG laser irradiation, or irradiated by each laser after air abrasion. Background Data:Optimized methods are needed to improve the adhesive bonding between resin cement and Y-TZP ceramic. Methods:Twelve specimens were irradiated with each laser at different parameters and examined by scanning electron microscopy to determine which parameters to use in this study. One hundred forty-one Y-TZP discs were assigned to nine groups:C, no treatment; AA, air abrasion; CJ, silica coating; ER, Er:YAG laser; ND, Nd:YAG laser; CO, CO2 laser; AA+ER, air abrasion+Er:YAG laser; AA+ND, air abrasion+Nd:YAG laser; AA+CO, air abrasion+CO2 laser. The composite cylinders were fabricated. After the surface treatments, the specimens were silanized and composite cylinders were cemented with the resin cement. The shear bond strength test was performed after specimens were stored in water for 24 h and after thermocycling for 500 cycles. Results:The highest bond strength was obtained in the AA group and was similar to that of the CJ group. In C, ER, CO, ND, AA+ND, and AA+CO groups, the shear bond strengths were similar to each other according to the Duncan test results. The lowest bond value was obtained in the AA+ER group. Conclusion:Although air abrasion and silica coating were the most effective surface treatment methods, CO2 and Er:YAG laser irradiation alone or Nd:YAG laser irradiation after air abrasion may be used as an alternative treatment method to increase the bond strength between resin cement and Y-TZP material.en_US
dc.identifier.doi10.1089/pho.2009.2697
dc.identifier.endpage808en_US
dc.identifier.issn1549-5418
dc.identifier.issn1557-8550
dc.identifier.issue6en_US
dc.identifier.pmid20969444en_US
dc.identifier.scopus2-s2.0-78650081805en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage801en_US
dc.identifier.urihttps://doi.org/10.1089/pho.2009.2697
dc.identifier.urihttps://hdl.handle.net/11616/95211
dc.identifier.volume28en_US
dc.identifier.wosWOS:000285189700014en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.language.isoenen_US
dc.publisherMary Ann Liebert, Incen_US
dc.relation.ispartofPhotomedicine and Laser Surgeryen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectIn-Vitro Evaluationen_US
dc.subjectNd-Yag Laseren_US
dc.subjectSurface Treatmentsen_US
dc.subjectConditioning Methodsen_US
dc.subjectComposite Resinen_US
dc.subjectRocatec Systemen_US
dc.subjectLuting Cementsen_US
dc.subjectOxideen_US
dc.subjectPorcelainen_US
dc.subjectRestorationsen_US
dc.titleBond Strength of Resin Cement to Yttrium-Stabilized Tetragonal Zirconia Ceramic Treated with Air Abrasion, Silica Coating, and Laser Irradiationen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu