Tribological behaviors and mechanical properties of novel Al-5Cu hybrid composites under dry sliding conditions

Basit Öğe Kaydı
dc.authoridŞap, Serhat/0000-0001-5177-4952
dc.authorwosidŞap, Serhat/AAD-6397-2019
dc.contributor.authorSap, Serhat
dc.contributor.authorDegirmenci, Unal
dc.contributor.authorUsca, Usame Ali
dc.contributor.authorUzun, Mahir
dc.date.accessioned2024-08-04T20:55:08Z
dc.date.available2024-08-04T20:55:08Z
dc.date.issued2024
dc.departmentİnönü Üniversitesien_US
dc.description.abstractThis study aims to develop aluminum composites, which are widely used in the automotive and aerospace industries. For this purpose, novel Al-5Cu/Al2O3-SiC hybrid composites were produced, and their mechanical and tribological performances were investigated. Hardness, density, and three-point bending analyses of hybrid composites were performed. In addition, wear and friction analyses were carried out under dry sliding conditions and applying different loads (5-10-15 N). In addition, the morphological properties of the produced hybrid composites were determined by microstructural analysis (SEM/EDS). High density, hardness, and strength values were obtained in hybrid composites produced using powder metallurgy and hot pressing methods. As a result of the wear test, it was determined that the hybrid reinforcements showed positive effects on the wear resistance. The lowest specific wear rate (SWR) value was 2.09 x 10-6 mm3/N.m. It was determined that the SWR values of the hybrid composites decreased with the increase of the applied load. In addition, plastic deformation and adhesion wear were observed as a result of SEM/EDS analyses taken from the worn surfaces.en_US
dc.identifier.doi10.1177/09544062241235553
dc.identifier.issn0954-4062
dc.identifier.issn2041-2983
dc.identifier.scopus2-s2.0-85186916418en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1177/09544062241235553
dc.identifier.urihttps://hdl.handle.net/11616/101863
dc.identifier.wosWOS:001179471200001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectNovel hybrid Al-5Cu compositesen_US
dc.subjectmechanical propertiesen_US
dc.subjectSWRen_US
dc.subjectfrictionen_US
dc.subjecttemperatureen_US
dc.titleTribological behaviors and mechanical properties of novel Al-5Cu hybrid composites under dry sliding conditionsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu