Effect of protrusion at the ends of bondline in single lap joints under tension and bending

Basit Öğe Kaydı
dc.authoridAkpinar, Salih/0000-0003-3247-991X
dc.authoridTEMİZ, ŞEMSETTİN/0000-0002-6737-3720
dc.authoridAYDIN, MURAT DEMIR/0000-0002-2287-2198
dc.authorwosiddemir, murat/GWZ-2151-2022
dc.authorwosidAkpinar, Salih/GRO-5911-2022
dc.authorwosidTEMİZ, ŞEMSETTİN/ABG-7809-2020
dc.authorwosidAKPINAR, Salih/ABC-1348-2020
dc.authorwosidDemir, Murat/AAD-8032-2021
dc.authorwosidAkpinar, Salih/AAE-7725-2019
dc.contributor.authorAkpinar, Salih
dc.contributor.authorTemiz, Semsettin
dc.contributor.authorAydin, Murat Demir
dc.contributor.authorOzel, Adnan
dc.date.accessioned2024-08-04T20:36:10Z
dc.date.available2024-08-04T20:36:10Z
dc.date.issued2012
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this work, elasto-plastic stress analysis of single lap joints with and without protrusion in adhesive bondline subjected to tension and bending was carried out using 2D non-linear finite element analysis and confirmed experimentally. AA 2024-T3 aluminum adherends were bonded with SBT 9244 film adhesive. The protrusion was obtained by extending the adhesive film by 2 mm from the overlap length at both overlap ends. Three different adherend thicknesses and overlap lengths for each loading and bondline type were used. The joints with and without protrusion, for comparison, were loaded with the same load for each adherend thickness and overlap length. Finally, it was observed that the protrusion reduces the strength in the joint under tension, while the protrusion increases the strength in the joint under bending.en_US
dc.identifier.doi10.1080/01694243.2012.691002
dc.identifier.endpage2602en_US
dc.identifier.issn0169-4243
dc.identifier.issue23en_US
dc.identifier.scopus2-s2.0-84867342579en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage2591en_US
dc.identifier.urihttps://doi.org/10.1080/01694243.2012.691002
dc.identifier.urihttps://hdl.handle.net/11616/95817
dc.identifier.volume26en_US
dc.identifier.wosWOS:000309684400002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofJournal of Adhesion Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectadhesivesen_US
dc.subjectsingle lap jointen_US
dc.subjectnon-linear finite elementen_US
dc.subjectstress analysisen_US
dc.subjectprotrusion effecten_US
dc.titleEffect of protrusion at the ends of bondline in single lap joints under tension and bendingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu