Thermal energy storage and mechanical enhancement of cement composites containing PCM-impregnated and cement-slurry coated pumice aggregates

Basit Öğe Kaydı
dc.contributor.authorGencel, Osman
dc.contributor.authorOzguler, Alper Tunga
dc.contributor.authorGuler, Onur
dc.contributor.authorUstaoglu, Abid
dc.contributor.authorHekimoglu, Gokhan
dc.contributor.authorSari, Ahmet
dc.contributor.authorEmiroglu, Mehmet
dc.date.accessioned2026-04-04T13:35:08Z
dc.date.available2026-04-04T13:35:08Z
dc.date.issued2025
dc.departmentİnönü Üniversitesi
dc.description.abstractIn the field of thermal energy management and building materials, PCM has been impregnated into aggregates and added to cement to produce composite concretes. However, challenges such as PCM leakage and poor interfacial bonding have limited their widespread application. To address these issues, this study utilized pumice aggregates with exceptional porosity, impregnated with PCM and coated with cement slurry, to develop enhanced composite concretes. The produced composites were characterized through compressive strength tests, thermal conductivity measurements, ultrasonic pulse velocity analysis, and detailed thermal regulation experiments under dynamic solar radiation. Thermal regulation experiments were conducted using thermal imaging under real-time heating and cooling processes. Results demonstrated that PCM-impregnated aggregates enhanced the thermal stability of concrete, with surface temperatures on PCM-based composites (MAL-2) being approximately 5 degrees C lower during heating compared to control samples (MAL-K). During the cooling process, MAL-2 exhibited delayed temperature reduction, stabilizing surface temperatures around 1 degrees C higher than MAL-K due to PCM's latent heat release. Experimental outcomes further presented that an increasing proportion of PCM-impregnated aggregates significantly reduced porosity from 13.55 % to 7.87 % and improved compressive strength from 12.7 MPa to 16.81 MPa. Thermal conductivity increased from 0.5706 to 0.7058 W/mK, while water absorption decreased from 13.94 % to 7.13 %. Ultrasonic pulse velocity values increased from 2.49 km/s to 2.58 km/s, indicating enhanced matrix integrity. This design, offering superior thermal regulation and mechanical performance, holds great promise for applications in energy-efficient building materials and sustainable construction practices.
dc.identifier.doi10.1016/j.est.2025.117847
dc.identifier.issn2352-152X
dc.identifier.issn2352-1538
dc.identifier.orcid0000-0001-7826-1348
dc.identifier.orcid0000-0001-6858-8216
dc.identifier.orcid0000-0003-3391-5015
dc.identifier.orcid0000-0002-0214-4986
dc.identifier.scopus2-s2.0-105011583064
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1016/j.est.2025.117847
dc.identifier.urihttps://hdl.handle.net/11616/109634
dc.identifier.volume132
dc.identifier.wosWOS:001541571700003
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier
dc.relation.ispartofJournal of Energy Storage
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WOS_20250329
dc.subjectCoated pumice aggregate
dc.subjectPhase change material
dc.subjectSustainable concrete
dc.subjectEnergy and energy efficiency
dc.subjectRenewable energy
dc.subjectSurface modification
dc.titleThermal energy storage and mechanical enhancement of cement composites containing PCM-impregnated and cement-slurry coated pumice aggregates
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu