Use of thermal images for optimizing burner height, operating pressure, and burner angle of a weed flamer

Basit Öğe Kaydı
dc.authorscopusid7006604572
dc.authorscopusid6504235784
dc.authorscopusid15848202900
dc.authorscopusid57189386496
dc.contributor.authorArslan S.
dc.contributor.authorTursun N.
dc.contributor.authorKurtulmuş F.
dc.contributor.authorGüleç D.
dc.date.accessioned2024-08-04T20:02:21Z
dc.date.available2024-08-04T20:02:21Z
dc.date.issued2016
dc.departmentİnönü Üniversitesien_US
dc.description.abstractA two-meter wide prototype weed flamer was developed as a tool for thermal weed control. The weed flamer consists of an LPG tank, pressure regulator, back pressure valve, flow valves, and burners. The burner adjustments are flexible with height setting from 0 to 450 mm and flame angle setting from and 0 to 90°.The thermal camera images were studied at different heights (150, 200, 250, and 300 mm), burner angles (30 and 45°), and pressures (0.1, 0.15, 0.2, 0.25 MPa) to determine the best settings under stationary operating conditions. Based on thermal camera image results, it was found that the burner should be set at 200-250 mm with 0.2-0.25 MPa to obtain the highest temperatures and longest flames. The initial tests of the gas burning system were completed as a broadcast flaming machine and gas doses from 15 to 90 kg ha-1 were applied from 0.25 m above the ground at 30° flaming angle at 0.2 MPa. The doseresponse curves of a weed (Convolvulus arvensis L.) were generated to determine the effectiveness of the weed flamer. C. arvensis could be controlled with gas doses from 40 to 82 kg ha-1 depending on the growth stage at 14 day after treatment (DAT). The theoretical field capacity of the 2 m wide flamer varies from 0.32 to 1.62 ha h-1 depending on the gas dose to be applied. © 2016, Eesti Pollumajandusulikool. All rights reserved.en_US
dc.identifier.endpage24en_US
dc.identifier.issn1406-894X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84970005342en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage14en_US
dc.identifier.urihttps://hdl.handle.net/11616/91634
dc.identifier.volume14en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEesti Pollumajandusulikoolen_US
dc.relation.ispartofAgronomy Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDose-responseen_US
dc.subjectFlamingen_US
dc.subjectLPGen_US
dc.subjectThermal imageen_US
dc.subjectWeed controlen_US
dc.titleUse of thermal images for optimizing burner height, operating pressure, and burner angle of a weed flameren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu