Catalytic dissolution of two Turkish lignites in tetralin under nitrogen atmosphere: effects of the extraction parameters on the conversion
Küçük Resim Yok
Tarih
2001
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Two Turkish lignites were extracted with tetralin in a batch autoclave under nitrogen atmosphere. Fe2O3, Mo(CO)(6), MoO3 or Al2O3 were used as the added catalyst. The isothermal extraction temperatures ranged from 325 to 425 degreesC, the starting nitrogen pressure ranged from atmospheric to 5 MPa, the isothermal extraction periods ranged from 0 to 120 min. After removal of char and solvent, the remaining products were separated into three fractions: preasphaltenes (benzene insolubles), asphaltenes (benzene soluble, n-pentane insolubles) and oils (n-pentane solubles) by successive extractions with benzene and n-pentane. The variations in the conversions and soluble product compositions were investigated with respect to the extraction conditions. The results indicate that the conversions of the lignites are low below 350 degreesC but high over 375 degreesC. The catalysts enhance mainly the oil formation, and the catalytic activities of Mo(CO)(6) and Fe2O3 are higher than the others. Lignite-impregnated catalysts show higher reactivity than the physically mixed catalysts. Increasing the extraction time and temperature affects the total conversion and soluble product composition. The gaseous product formation increases with the time at temperatures of 400 degreesC and above. (C) 2001 Elsevier Science Ltd. All rights reserved.
Açıklama
Anahtar Kelimeler
lignite, catalyst, catalytic liquefaction
Kaynak
Fuel
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
80
Sayı
4
