INVESTIGATION OF THE BALLISTIC AND MECHANICAL PROPERTIES OF THE PRE AND POST-WELDED 7039 ALUMINUM ALLOY
Küçük Resim Yok
Tarih
2011
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Gazi Univ, Fac Engineering Architecture
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the special weld grooves was created on 7039 Al-Zn armor plate with different thickness of 12.7 and 38 mm and they were welded with MIG welding technique via multiple pass. After that, the ballistic and mechanical properties of these plates were examined. V-50 ballistic limit values of the base metal, the heat affected zone and the weld metal of the welded plate of 38 mm thickness were determined by shooting with laboratory bullets of 12.7 mm. 12.7 mm thickness welded plates were used for determining the mechanical properties. It is observed that the ballistic and mechanical properties of the welded samples decrease. Moreover the highest V-50 ballistic limit value was obtained from the base metal whereas the lowest V-50 ballistic limit value was obtained from the welded metal.
Açıklama
Anahtar Kelimeler
7039 Al alloy, V-50 ballistic limit, ballistic and mechanical properties
Kaynak
Journal of The Faculty of Engineering and Architecture of Gazi University
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
26
Sayı
1
