INVESTIGATION OF THE BALLISTIC AND MECHANICAL PROPERTIES OF THE PRE AND POST-WELDED 7039 ALUMINUM ALLOY

dc.contributor.authorErdem, Mehmet
dc.contributor.authorTurker, Mehmet
dc.date.accessioned2024-08-04T20:59:40Z
dc.date.available2024-08-04T20:59:40Z
dc.date.issued2011
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, the special weld grooves was created on 7039 Al-Zn armor plate with different thickness of 12.7 and 38 mm and they were welded with MIG welding technique via multiple pass. After that, the ballistic and mechanical properties of these plates were examined. V-50 ballistic limit values of the base metal, the heat affected zone and the weld metal of the welded plate of 38 mm thickness were determined by shooting with laboratory bullets of 12.7 mm. 12.7 mm thickness welded plates were used for determining the mechanical properties. It is observed that the ballistic and mechanical properties of the welded samples decrease. Moreover the highest V-50 ballistic limit value was obtained from the base metal whereas the lowest V-50 ballistic limit value was obtained from the welded metal.en_US
dc.identifier.endpage26en_US
dc.identifier.issn1300-1884
dc.identifier.issue1en_US
dc.identifier.startpage17en_US
dc.identifier.urihttps://hdl.handle.net/11616/103432
dc.identifier.volume26en_US
dc.identifier.wosWOS:000289174900003en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univ, Fac Engineering Architectureen_US
dc.relation.ispartofJournal of The Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject7039 Al alloyen_US
dc.subjectV-50 ballistic limiten_US
dc.subjectballistic and mechanical propertiesen_US
dc.titleINVESTIGATION OF THE BALLISTIC AND MECHANICAL PROPERTIES OF THE PRE AND POST-WELDED 7039 ALUMINUM ALLOYen_US
dc.typeArticleen_US

Dosyalar