Effect of Substrates on Superconducting Properties of MgB2 Thick Films Fabricated by Spraying Method

dc.authoridOzabaci, Murat/0000-0002-0667-6066
dc.authoridAksan, Mehmet Ali/0000-0001-9465-0319
dc.authorwosidOzabaci, Murat/A-2808-2016
dc.authorwosidAksan, Mehmet Ali/AAE-8854-2021
dc.authorwosidAksan, Mehmet Ali/AAA-4187-2021
dc.contributor.authorOzabaci, M.
dc.contributor.authorAksan, M. A.
dc.contributor.authorYakinci, M. E.
dc.date.accessioned2024-08-04T20:35:32Z
dc.date.available2024-08-04T20:35:32Z
dc.date.issued2011
dc.departmentİnönü Üniversitesien_US
dc.description.abstractMgB2 thick films have been prepared on Al2O3, MgO and SrTiO3 ceramic substrates using the spray method with two different heat-treatment cycles, 925 A degrees C with 10 min (Group A) and 610 A degrees C with 24 h (Group B). The structural/microstructural (XRD, SEM) and transport (R-T, MR-T) properties of the films prepared were investigated. XRD analysis showed that the films in Groups A and B consisted mainly of MgB2, but the peaks originating from the substrates were also observed in films fabricated on the Al2O3 substrate. From scanning electron microscopy, it was seen that the surface of MgB2 thick films prepared is not sufficiently homogeneous. Some cracks and heaps with different sizes were observed. The best electrical results were obtained for films in Group A on Al2O3 substrate. The T (c) value for films in Group A was found to be 36.1 K, 36 K and 35 K, for Al2O3, MgO and SrTiO3 substrates, respectively. No superconducting state was reached for films in Group B on the SrTiO3 substrate. In all the films which showed a superconducting state, the magnetic field strongly affected T (c) . A tail in the resistance curves was observed with increasing magnetic field for films in Group A on the MgO and SrTiO3 substrates. At magnetic fields above 1 T for films in Group A on the SrTiO3 substrate and above 2 T for films in Group A on the MgO substrate, the zero-resistance temperature, T (0), was not obtained.en_US
dc.identifier.doi10.1007/s10948-010-0995-2
dc.identifier.endpage363en_US
dc.identifier.issn1557-1939
dc.identifier.issue1-2en_US
dc.identifier.scopus2-s2.0-80052145565en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage357en_US
dc.identifier.urihttps://doi.org/10.1007/s10948-010-0995-2
dc.identifier.urihttps://hdl.handle.net/11616/95416
dc.identifier.volume24en_US
dc.identifier.wosWOS:000289855700057en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Superconductivity and Novel Magnetismen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMgB2 thick filmen_US
dc.subjectSpraying methoden_US
dc.subjectCeramic substrateen_US
dc.titleEffect of Substrates on Superconducting Properties of MgB2 Thick Films Fabricated by Spraying Methoden_US
dc.typeArticleen_US

Dosyalar