Investigation of Sheet Thickness and Punch Force in Die Surface Angled Hydro-mechanical Deep Drawing Method

Basit Öğe Kaydı
dc.authorscopusid57118153500
dc.authorscopusid15077134400
dc.authorscopusid16022848200
dc.contributor.authorBallikaya H.
dc.contributor.authorSavaş V.
dc.contributor.authorÖzay Ç.
dc.date.accessioned2024-08-04T20:03:33Z
dc.date.available2024-08-04T20:03:33Z
dc.date.issued2023
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, the effect of die surface angled hydro-mechanical deep drawing method on sheet metal cup wall thickness and punch force was investigated as experimental and numerical analysis. In the works, 0.9 mm thick DIN EN 10130-1999 sheet metal material was used. The effect of variables on the test results was investigated by using die surface/blank holder angle, punch nose radius, die shoulder radius, chamber pressure and blank holder force as experimental parameters. Numerical analysis experiments were carried out using ANSYS 15.0 package program. Besides, experiments were performed according to the Taguchi experi ment plan and L18 orthogonal array. The obtained data were analysed statistically by ANOVA analysis of variance in MINITAB 17.0 package program, and the effect of each parameter on the results was determined as a percentage. As a result, it was determined that the thinning was approximately 15% at most and the thickening was 10%. © 2023, TUBITAK. All rights reserved.en_US
dc.identifier.doi10.31202/ECJSE.1232536
dc.identifier.endpage491en_US
dc.identifier.issn2148-3736
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85174959671en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage475en_US
dc.identifier.urihttps://doi.org/10.31202/ECJSE.1232536
dc.identifier.urihttps://hdl.handle.net/11616/91913
dc.identifier.volume10en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTUBITAKen_US
dc.relation.ispartofEl-Cezeri Journal of Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCup wall thicknessen_US
dc.subjectDie surface angled hydro-mechanical deep drawingen_US
dc.subjectFEMen_US
dc.subjectPunch forceen_US
dc.subjectTaguchien_US
dc.titleInvestigation of Sheet Thickness and Punch Force in Die Surface Angled Hydro-mechanical Deep Drawing Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu