Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites

Basit Öğe Kaydı
dc.authoridÖzdemir, Burak/0000-0002-5870-0398
dc.authoridYARDIMEDEN, AHMET/0000-0003-2776-1195
dc.authoridEMIR, ENDER/0000-0003-4972-5064
dc.authoridBahce, Erkan/0000-0001-5389-5571
dc.authorwosidÖzdemir, Burak/AAB-6654-2020
dc.contributor.authorOzdemir, Burak
dc.contributor.authorYardimeden, Ahmet
dc.contributor.authorBahce, Erkan
dc.contributor.authorKilickap, Erol
dc.contributor.authorEmir, Ender
dc.date.accessioned2024-08-04T20:53:17Z
dc.date.available2024-08-04T20:53:17Z
dc.date.issued2023
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn the study, Natural jute composite materials, which have environmental advantages due to their easily degradable nature were drilled with different processing parameters and the effects of thrust force, vibration and temperature changes on hole quality were investigated. The effect of feed and spindle speed was statistically analyzed using ANOVA method. The thrust force, vibration and temperature factors that occur depending on the drilling parameters vary and affect the roughness and delamination values. The effect of feed and speed on thrust force was calculated as 97.87% and the feed effect (90.85%) is far greater than the speed (9.15%). The effect of drilling parameters on vibration is statistically insignificant due to the different spread behavior in the layers of the composite material (R2 = 0.2329). However, feed effect on vibration (94.6%) is greater than the speed effect (6.06%). The temperature is affected by 96.93% of the drilling parameters and the speed is 84.16% and the feed is 15.83%. The roughness effect depending on the drilling parameters is measured as 84.91%. The effect of speed on roughness (90.26%) is greater than the feed (9.73%). It has been determined that this situation is mostly related to vibration and temperature.en_US
dc.identifier.doi10.1080/15440478.2022.2159608
dc.identifier.issn1544-0478
dc.identifier.issn1544-046X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85145254903en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1080/15440478.2022.2159608
dc.identifier.urihttps://hdl.handle.net/11616/101086
dc.identifier.volume20en_US
dc.identifier.wosWOS:000904662700001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofJournal of Natural Fibersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectDrillingen_US
dc.subjectSurface roughnessen_US
dc.subjectDelamination factoren_US
dc.subjectThrust forceen_US
dc.subjectVibrationen_US
dc.subjectDrill temperatureen_US
dc.titleAnalysis of Drilling Behaviour in Jute Fibres Reinforced Natural Compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu