The production of a low cost printing device for energy storage systems and the application for supercapacitors

Basit Öğe Kaydı
dc.authoridBulut, Fatih/0000-0001-6603-2468
dc.authoridYaşar, Sedat/0000-0001-7285-2761
dc.authorwosidBulut, Fatih/F-7201-2013
dc.authorwosidYaşar, Sedat/ABG-8356-2020
dc.contributor.authorAltin, S.
dc.contributor.authorBulut, F.
dc.contributor.authorYasar, S.
dc.date.accessioned2024-08-04T20:46:49Z
dc.date.available2024-08-04T20:46:49Z
dc.date.issued2019
dc.departmentİnönü Üniversitesien_US
dc.description.abstractThe miniature printing device was produced by using 3- axis stage and the stage was controlled by microprocessor. The ink section was fixed at the top of the stage and the substrate was mobile in the system. The ink was produced by using graphene as an electrode material and it was printed on a non-conductive substrate. It was used a 1M KOH for an electrolyte material and electrochemical performance of the device were investigated. It was obtained that the first cycle specific capacity of the device is 102 F/g and it was decreased to 88 F/g for 1000 cycle. So it may say that the device is very useful for energy storage device and it is cheaper than that of the commercial systems.en_US
dc.description.sponsorshipInonu University Research Council [FDK-2017-730]en_US
dc.description.sponsorshipThe project was supported by Inonu University Research Council with contract number of FDK-2017-730.en_US
dc.identifier.doi10.1016/j.est.2019.100882
dc.identifier.issn2352-152X
dc.identifier.scopus2-s2.0-85073704483en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.1016/j.est.2019.100882
dc.identifier.urihttps://hdl.handle.net/11616/98984
dc.identifier.volume25en_US
dc.identifier.wosWOS:000489689000068en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.ispartofJournal of Energy Storageen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject3D printingen_US
dc.subjectMiniature systemen_US
dc.subjectEnergy storageen_US
dc.titleThe production of a low cost printing device for energy storage systems and the application for supercapacitorsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu