Effect of Secondary Annealing Process on Critical Current Density in Highly Textured Bi-2212 Superconducting System

dc.authoridAksan, Mehmet Ali/0000-0001-9465-0319
dc.authoridTorres Portero, Miguel Angel/0000-0003-3995-5763
dc.authoridSotelo, Andres/0000-0001-7056-0546
dc.authoridConstantinescu, Gabriel/0000-0002-1614-1962
dc.authoridRasekh, Shahed/0000-0003-3466-9952
dc.authoridDiez, Juan C./0000-0001-9995-6368
dc.authorwosidAksan, Mehmet Ali/AAE-8854-2021
dc.authorwosidAksan, Mehmet Ali/AAA-4187-2021
dc.authorwosidTorres Portero, Miguel Angel/J-9020-2012
dc.authorwosidTorres, Miguel/HZK-8113-2023
dc.authorwosidSotelo, Andres/A-6537-2009
dc.authorwosidConstantinescu, Gabriel/J-7804-2013
dc.authorwosidRasekh, Shahed/A-1248-2010
dc.contributor.authorAksan, M. A.
dc.contributor.authorMadre, M. A.
dc.contributor.authorRasekh, Sh.
dc.contributor.authorConstantinescu, G.
dc.contributor.authorTorres, M. A.
dc.contributor.authorDiez, J. C.
dc.contributor.authorSotelo, A.
dc.date.accessioned2024-08-04T20:41:09Z
dc.date.available2024-08-04T20:41:09Z
dc.date.issued2015
dc.departmentİnönü Üniversitesien_US
dc.description.abstractBi-2212 samples prepared by a solid-state reaction technique have been grown from the melt using the laser floating zone method. After annealing the as-grown bars, the samples showed a good grain alignment and a high transport critical current density. Secondary annealing processes were performed on the annealed samples with the aim of producing Bi-2212 phase controlled decomposition. Hence, the Bi-2201 phase and the secondary phases, which act as effective pinning centers, were obtained with the secondary annealing process. After these thermal treatments, the transport critical current densities of samples significantly increased, when compared to the annealed ones. The maximum critical current density was achieved when the samples were subjected to secondary annealing at 680A degrees C for 168 h with an improvement of similar to 80%, compared to the annealed ones. Moreover, it was found that magnetization of the secondarily annealed samples was also increased. The magnetic critical current densities in these secondary annealed samples were about 3 times higher than the values obtained for the annealed ones. These results clearly indicate that the secondary annealing processes lead to the formation of effective pinning centers in the bulk material.en_US
dc.description.sponsorshipGobierno de Aragon (Grupos de Investigacion Consolidados) [T12, T87]; Spanish MINECO-FEDER [MAT2013-46505-C3-1-R]en_US
dc.description.sponsorshipThe authors acknowledge financial support from the Gobierno de Aragon (Grupos de Investigacion Consolidados T12 and T87) and the Spanish MINECO-FEDER (Project MAT2013-46505-C3-1-R). The technical contributions of C. Estepa and C. Gallego are also acknowledged.en_US
dc.identifier.doi10.1007/s11837-015-1509-2
dc.identifier.endpage2086en_US
dc.identifier.issn1047-4838
dc.identifier.issn1543-1851
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-84940438021en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2079en_US
dc.identifier.urihttps://doi.org/10.1007/s11837-015-1509-2
dc.identifier.urihttps://hdl.handle.net/11616/96954
dc.identifier.volume67en_US
dc.identifier.wosWOS:000360229700025en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJomen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectLaser Floating-Zoneen_US
dc.subjectBi2sr2cacu2o8 Ceramicsen_US
dc.subjectElectrical-Propertiesen_US
dc.subjectRapid Synthesisen_US
dc.subjectMicrostructureen_US
dc.subjectCompositesen_US
dc.subjectGrowthen_US
dc.subjectPhaseen_US
dc.subjectBsccoen_US
dc.subjectEnhancementen_US
dc.titleEffect of Secondary Annealing Process on Critical Current Density in Highly Textured Bi-2212 Superconducting Systemen_US
dc.typeArticleen_US

Dosyalar