Determination of optimum process parameters in desulphurization of fuel oil

Basit Öğe Kaydı
dc.authoridKaraca, Huseyin/0000-0002-0543-8947
dc.authorwosidKaraca, Huseyin/ABG-8103-2020
dc.contributor.authorYidiz, Z
dc.contributor.authorKaraca, H
dc.date.accessioned2024-08-04T20:13:51Z
dc.date.available2024-08-04T20:13:51Z
dc.date.issued2005
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this research, desulphurization of number 6 fuel oil (residue fuel oil) by chemical methods was studied. Besides, factors like reaction temperature, reaction time, concentration, and stirring speed were examined to determine the effects of various process parameters on desulphurization and on higher heating value. According to the results obtained, the optimum values of process parameters were determined as H2O2 concentration of 15%, reaction temperature of 40 degrees C, reaction time of 60-150 min and stirring speed of 1,000 rpm. Under these conditions, the sulphur content in the fuel oil sample was reduced from 2.78 to 2.29%-1.54% approximately. The degree of desulphurization increased, but higher heating value decreased seriously at high levels of H2O2 concentration, reaction temperature, reaction time, and stirring speed. Some fuel oil samples that are pretreated with H2O2/0.1 N H2SO4 were extracted successively with acetone, ethanol, ethylene glycol, and hydrogen peroxide. In conclusion, the sulphur content decreased approximately from 2.29 to 1.08%. Partial decrease determined in the higher heating value of the sample at the end of extraction.en_US
dc.identifier.doi10.1081/LFT-200030940
dc.identifier.endpage384en_US
dc.identifier.issn1091-6466
dc.identifier.issn1532-2459
dc.identifier.issue3-4en_US
dc.identifier.scopus2-s2.0-17444394828en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage371en_US
dc.identifier.urihttps://doi.org/10.1081/LFT-200030940
dc.identifier.urihttps://hdl.handle.net/11616/93890
dc.identifier.volume23en_US
dc.identifier.wosWOS:000228524700012en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofPetroleum Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectfuel oilen_US
dc.subjectsulphuren_US
dc.subjectprocess parametersen_US
dc.subjectdesulphurizationen_US
dc.subjecthigher heating valueen_US
dc.titleDetermination of optimum process parameters in desulphurization of fuel oilen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu