Thermal energy storage performance evaluation of bio-based phase change material/apricot kernel shell derived activated carbon in lightweight mortar
Küçük Resim Yok
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The synergy between phase change materials (PCMs) and activated carbon (AC) obtained from biomass is an energy-efficient method for creating composite materials with enhanced thermal performance. This study presents such a leak-proof composite with enhanced properties through the impregnation of bio-based lauric acid (L)-capric acid (C) eutectic mixture (LCEM) as a PCM in the AC derived from apricot kernel shells (AC-AKS) framework. The manufactured AC-AKS/PCM composite was subsequently incorporated into cement-pumice based mortar (CPM) in various proportions. This was done to produce energy-efficient construction materials aimed at increasing the thermal performance of buildings. Morphological, physical, thermal stability, mechanical strength, thermal energy storage (TES) and solar thermoregulation performances of the obtained leak-proof composite PCM were experimentally determined. The compressive strength of CPM samples with TES ability (TESCPM) was found 6.8 MPa, 4.3 MPa and 2.1 MPa for TESCPM1, TESCPM2 and TESCPM3, respectively. The relatively lower mechanical strength values can be accepted when considering their thermal regulation performances. The apparent porosity was around 26 %, while water adsorption around 24 % for TESCPM3. FTIR results proved the presence of well chemical compatibility between AC-AKS and PCM. The DSC results exposed that the AC-AKS/PCM composite had a melting temperature and a latent heat capacity of 21.58 degrees C and 126.8 J/g, respectively, while these values were within the range of 18.93-20.51 degrees C and 10.55-30.32 J/g for the TESCPMs. TGA results exposed that the functioning temperature of the AC-AKS/PCM was greatly lower than the limit temperature value measured for its thermal degradation. The solar thermoregulation performance test indicated that the fabricated TESCPM exhibited noteworthy advantages by providing the cooling effect throughout the daytime as well as the heating effect throughout the nighttime. All of these favorable properties make the proposed AC-AKS/PCM-integrated CPM promising materials for innovative TES applications in construction elements.
Açıklama
Anahtar Kelimeler
Apricot kernel shell, Activated carbon, Phase change material, Lightweight mortar, Thermal energy storage, Smart building
Kaynak
Journal of Energy Storage
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
73
