Production of Pb-doped LiFePO4 and analysis of their electrochemical performance

Küçük Resim Yok

Tarih

2023

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Springer

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

In this study, LiFe1-xPbxPO4 (x = 0-0.12) powders were successfully produced by solid-state technique. The XRD patterns of the samples exhibit that the main phase is LiFePO4 with minor impurity phases of PbO and Fe2O3 in the structure, in which the phase ratio of PbO increases with increasing doping content. Four probe electrical resistance measurements showed that resistance decreases from 111 kO to 37 kO when increasing Pb-content; however, CV measurement indicated that redox peak wideness increased for x = 0.09, unwanted behavior for the battery cells. The galvanostatic cycles at C/2-rate yielded the highest capacity value of 121.6 mAh/g at room conditions with 1.06% capacity fade over 100 cycles when using x = 0 0.06 sample-better than undoped cells-while C-rate tests confirmed promising results for LiFePO4 cells using same sample concentration level.

Açıklama

Anahtar Kelimeler

Cathode Material, Rechargeable Lithium, Ion, Carbon, Zinc, Batteries, Ni

Kaynak

Journal of Materials Science-Materials in Electronics

WoS Q Değeri

Q2

Scopus Q Değeri

Q2

Cilt

34

Sayı

26

Künye