Investigation of microstructure and mechanical properties of Cu/Ti-B-SiCP hybrid composites

Basit Öğe Kaydı
dc.authoriduzun, mahir/0000-0002-0907-6875
dc.authoridŞap, Serhat/0000-0001-5177-4952
dc.authorwosiduzun, mahir/ABG-8489-2020
dc.authorwosidUzun, Mahir/ITT-4933-2023
dc.authorwosidŞap, Serhat/AAD-6397-2019
dc.contributor.authorSap, Serhat
dc.contributor.authorTurgut, Aydin
dc.contributor.authorUzun, Mahir
dc.date.accessioned2024-08-04T20:50:26Z
dc.date.available2024-08-04T20:50:26Z
dc.date.issued2021
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, Cu/Ti-B-SiCp hybrid composite materials were produced by powder metallurgy method using three different sintering temperatures (950, 1000, 1050 degrees C). The optimum sintering temperature of Cu main matrix composites reinforced with Ti-B-SiCp reinforcement materials at 2-4-6-8 wt.% were determined and their microstructure and mechanical properties were investigated. As a result of microstructure studies, it was determined that reinforcement elements have a homogeneous interface in the main matrix. The hardness of the produced composites was determined by the Brinell hardness method. The highest hardness value (77.74 HB) was determined in the sample with 6 wt% reinforcement ratio. In the tensile and three point bending tests, maximum strength values (112.96 MPa, 37.76 MPa) were found in samples with a reinforcement ratio of 4 wt%. It was determined that increasing reinforcement ratios and sintering temperature made a positive contribution to the hybrid composite materials produced.en_US
dc.identifier.doi10.1016/j.ceramint.2021.07.165
dc.identifier.endpage29929en_US
dc.identifier.issn0272-8842
dc.identifier.issn1873-3956
dc.identifier.issue21en_US
dc.identifier.scopus2-s2.0-85111035044en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage29919en_US
dc.identifier.urihttps://doi.org/10.1016/j.ceramint.2021.07.165
dc.identifier.urihttps://hdl.handle.net/11616/100061
dc.identifier.volume47en_US
dc.identifier.wosWOS:000701279200001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofCeramics Internationalen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectComposite materialsen_US
dc.subjectCopperen_US
dc.subjectPowder metallurgyen_US
dc.subjectMicrostructureen_US
dc.subjectMechanical propertiesen_US
dc.titleInvestigation of microstructure and mechanical properties of Cu/Ti-B-SiCP hybrid compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu