A comparative study on PI-PD controller design using stability region centroid methods for unstable, integrating and resonant systems with time delay
Küçük Resim Yok
Tarih
2024
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Sage Publications Ltd
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this paper, controller tuning methods based on stability region centroid methods reported in the literature are used to design PI-PD controllers for unstable, integrating and resonant systems with time delay. By analyzing the stability boundary locus (SBL) for the PD controller, which is utilized in the inner loop of this structure, the controller parameters are obtained using three methods which are the Weighted Geometric Center (WGC), Centroid of Convex Stability Region (CCSR), and Stability Triangle Approach (STA). These techniques were applied analytically, step by step. For the closed loop transfer function obtained in the inner loop of the controlled system, these three methods were utilized to design the PI controller in the outer loop, individually. Unit step responses of the controlled system, using PI-PD gains determined by each method, have been obtained. Furthermore, a disturbance of a certain time and amplitude was added to the systems to test the disturbance rejection behavior and the robustness performance of the methods. Perturbed responses were obtained through changing the model parameters at a certain rate. Time domain performance metrics were analyzed to compare the responses. The simulations were evaluated using settling time, rise time, and percentage overshoot as the assessment criteria. As a result of this study, the effectiveness of three methods, namely WGC, CCSR, and STA, in controller design for unstable, integrating, and resonant time-delay systems has been demonstrated. In addition, a comparison of time domain performance metrics is presented for the nominal and perturbed systems. Based on these comparisons, it is concluded that the methods outperform each other only in some time response performance measures. The presented results showed the advantages of these methods over each other in terms of some performance criteria. The contribution of this study to the literature is the comparative analysis of these three analytical methods.
Açıklama
Anahtar Kelimeler
Weighted geometric center, stability region centroid, stability triangle approach, centroid of convex stability region, PI-PD controller
Kaynak
Measurement & Control
WoS Q Değeri
N/A
Scopus Q Değeri
Q2
