The effect of Mo addition on the microstructure and Jc properties of MgB2 tapes fabricated by PIT method
dc.authorid | Aksan, Mehmet Ali/0000-0001-9465-0319 | |
dc.authorid | ALTIN, Serdar/0000-0002-4590-907X | |
dc.authorid | Altin, Emine/0000-0002-2187-4036 | |
dc.authorwosid | BAYAZIT, Elif/KFS-7620-2024 | |
dc.authorwosid | Aksan, Mehmet Ali/AAA-4187-2021 | |
dc.authorwosid | ALTIN, Serdar/H-4880-2014 | |
dc.authorwosid | Aksan, Mehmet Ali/AAE-8854-2021 | |
dc.authorwosid | balci, yakup/AAA-4174-2021 | |
dc.contributor.author | Bayazit, E. | |
dc.contributor.author | Altin, S. | |
dc.contributor.author | Yakinci, M. E. | |
dc.contributor.author | Aksan, M. A. | |
dc.contributor.author | Balci, Y. | |
dc.date.accessioned | 2024-08-04T20:30:47Z | |
dc.date.available | 2024-08-04T20:30:47Z | |
dc.date.issued | 2008 | |
dc.department | İnönü Üniversitesi | en_US |
dc.description.abstract | We investigated the effect of Mo addition to MgB2/Ag tapes fabricated by the ex situ PIT method. The heat treatments were carried out at 600 degrees C for 24 h under At atmosphere. The structural development, microstructures, superconducting properties and critical current density were characterized by means of XRD, SEM, M-T and M-H measurements. XRD and SEM studies indicated that Mo, not reacting with matrix of MgB2, was formed. The T-c of the tapes decreased in all the addition levels. The maximum J(c) value was obtained to be 1.2 x 10(5) A cm(-2) at 10 K for pure MgB2 tape. Decrease of J(c) was observed with increasing the Mo concentration. The J(c)-H characteristics of the tapes were decreased by the addition of Mo. This is considered to be due to the reduced flux-pinning force in the material. (C) 2007 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi | 10.1016/j.jallcom.2007.03.072 | |
dc.identifier.endpage | 46 | en_US |
dc.identifier.issn | 0925-8388 | |
dc.identifier.issn | 1873-4669 | |
dc.identifier.issue | 1-2 | en_US |
dc.identifier.scopus | 2-s2.0-42649102705 | en_US |
dc.identifier.scopusquality | Q1 | en_US |
dc.identifier.startpage | 42 | en_US |
dc.identifier.uri | https://doi.org/10.1016/j.jallcom.2007.03.072 | |
dc.identifier.uri | https://hdl.handle.net/11616/94515 | |
dc.identifier.volume | 457 | en_US |
dc.identifier.wos | WOS:000256124900013 | en_US |
dc.identifier.wosquality | Q1 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier Science Sa | en_US |
dc.relation.ispartof | Journal of Alloys and Compounds | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | MgB2 superconducting system | en_US |
dc.subject | PIT method | en_US |
dc.subject | critical current density | en_US |
dc.subject | J(c) | en_US |
dc.title | The effect of Mo addition on the microstructure and Jc properties of MgB2 tapes fabricated by PIT method | en_US |
dc.type | Article | en_US |