The effect of furnace annealing and surface crystallization on the anisotropy, ?E and magnetoimpedance effects in Fe71Cr7Si9B13 amorphous wires

dc.authoridKolat, Veli Serkan/0000-0002-8864-5051
dc.authoridBayri, Nevzat/0000-0001-7105-7707
dc.authorwosidAtalay, Selcuk/AAA-5095-2021
dc.authorwosidAtalay, Funda/AAA-4130-2021
dc.authorwosidKolat, Veli Serkan/ABI-5280-2020
dc.authorwosidBayri, Nevzat/ABG-9663-2020
dc.contributor.authorBayri, N
dc.contributor.authorKolat, VS
dc.contributor.authorAtalay, FE
dc.contributor.authorAtalay, S
dc.date.accessioned2024-08-04T20:13:38Z
dc.date.available2024-08-04T20:13:38Z
dc.date.issued2004
dc.departmentİnönü Üniversitesien_US
dc.description.abstractThe dependence of the magnetization loops, coercivity, anisotropy constant, DeltaE and magnetoimpedance (MI) effects in positively magnetostrictive Fe71Cr7Si9B13 amorphous wires on annealing conditions were studied. Samples were annealed at temperatures of 440degreesC and 460degreesC for durations between 0.3 and 300 min. The results indicate that progressive annealing first leads to relief of internal stresses and annealing of wires at 460degreesC for 60 min produces the minimum coercivity of about 1 A m(-1). Further annealing increases the coercivity and anisotropy, due to partial crystallization at the surface. It was found that the anisotropy changes its direction to the circumferential direction with the surface crystallization. The maximum change in Young's modulus was measured to be about 75% in a partly surface crystalline sample. It was observed that the magnitude of the MI effect of the stress relieved sample could exceed 200% at 1 MHz.en_US
dc.identifier.doi10.1088/0022-3727/37/22/002
dc.identifier.endpage3072en_US
dc.identifier.issn0022-3727
dc.identifier.issn1361-6463
dc.identifier.issue22en_US
dc.identifier.scopus2-s2.0-10044262234en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage3067en_US
dc.identifier.urihttps://doi.org/10.1088/0022-3727/37/22/002
dc.identifier.urihttps://hdl.handle.net/11616/93750
dc.identifier.volume37en_US
dc.identifier.wosWOS:000225557800004en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherIop Publishing Ltden_US
dc.relation.ispartofJournal of Physics D-Applied Physicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectGiant Magneto-Impedanceen_US
dc.subjectInternal-Frictionen_US
dc.subjectStressen_US
dc.subjectFesiben_US
dc.titleThe effect of furnace annealing and surface crystallization on the anisotropy, ?E and magnetoimpedance effects in Fe71Cr7Si9B13 amorphous wiresen_US
dc.typeArticleen_US

Dosyalar