Effects of VCN coating of PEEK gears with the PVD method on wear performance

Basit Öğe Kaydı
dc.authoriduzun, mahir/0000-0002-0907-6875
dc.authoridSap, Emine/0000-0002-7739-0655
dc.authorwosiduzun, mahir/ABG-8489-2020
dc.contributor.authorCureoglu, Arif
dc.contributor.authorUzun, Mahir
dc.contributor.authorSap, Emine
dc.date.accessioned2024-08-04T20:54:59Z
dc.date.available2024-08-04T20:54:59Z
dc.date.issued2024
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, the effects of coating gear wheels made of PEEK material, which is frequently used in the industry, with the PVD method on the tribological performance were investigated. Spur gears with 6 modules, 15 teeth, and 20 mm surface width consisting of PEEK samples were used as the base material. Gears modeled in Solidworks were manufactured on a CNC milling machine. The coating process was performed with VCN target material in three different thicknesses. After the coating process, hardness and wear tests were applied to the samples. An increase in the hardness values of the samples coated in different thicknesses was observed compared to the pure PEEK material. As the coating thickness increased, the amount of wear on the gear wheels increased and it was determined that the most resistant sample against wear was the gear wheel with a coating thickness of 367 nm. In experiments conducted in different liquids, it was observed that the most wear occurred in NaCl solution.en_US
dc.description.sponsorshipInn niversitesi [BAP-2023-ID2991]; Research Fund of the Inonu Universityen_US
dc.description.sponsorshipThis study was produced from the master thesis titled Ceramic Coating of Straight Gear Wheels Made of PEEK (Polyether Ether Ketone) Material with PVD Method and Investigation of The Wear Behavior. Also, this work was supported by the Research Fund of the Inonu University (Project Number: BAP-2023-ID2991).en_US
dc.identifier.doi10.1007/s10965-024-03884-x
dc.identifier.issn1022-9760
dc.identifier.issn1572-8935
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85182865043en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s10965-024-03884-x
dc.identifier.urihttps://hdl.handle.net/11616/101772
dc.identifier.volume31en_US
dc.identifier.wosWOS:001147787900001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Polymer Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPEEKen_US
dc.subjectMagnetron sputteringen_US
dc.subjectVCN coatingen_US
dc.subjectSpur gearsen_US
dc.subjectWearen_US
dc.titleEffects of VCN coating of PEEK gears with the PVD method on wear performanceen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu