Mechanical behaviour of adhesively repaired pipes subject to internal pressure

Basit Öğe Kaydı
dc.authoridAYAZ, Yaşar/0000-0002-1089-0700
dc.authoridTEMİZ, ŞEMSETTİN/0000-0002-6737-3720
dc.authoridAYDIN, MURAT DEMIR/0000-0002-2287-2198
dc.authorwosidAYAZ, Yaşar/ABG-8694-2020
dc.authorwosiddemir, murat/GWZ-2151-2022
dc.authorwosidTEMİZ, ŞEMSETTİN/ABG-7809-2020
dc.authorwosidDemir, Murat/AAD-8032-2021
dc.contributor.authorCitil, S.
dc.contributor.authorAyaz, Y.
dc.contributor.authorTemiz, S.
dc.contributor.authorAydin, M. D.
dc.date.accessioned2024-08-04T20:43:00Z
dc.date.available2024-08-04T20:43:00Z
dc.date.issued2017
dc.departmentİnönü Üniversitesien_US
dc.description.abstractPipes can crack over time, particularly in areas with pipefittings and joints subject to high pressure and unsteady temperatures. Repair of these cracks requires labour, time, and expense and the cracked pipes are currently repaired with two methods. The first method is cutting out the damaged section of the pipe and adding an additional joint, which requires much time and labour. The second method is replacing the damaged pipe, which requires expensive materials. The aim of this study is to propose an alternative method that reduces or eliminates the use of labour, time, and materials, in order to quickly re-activate pipelines. For this purpose, the cracked steel pipes were repaired by using an adhesive, and the mechanical,behaviours of the repaired pipes were investigated experimentally and numerically. In the first step of the study, artificial cracks were created on the pipes and the cracked pipes were repaired using adhesive and galvanized steel patches with different overlap lengths, overlap angles and thicknesses. Then, the repaired pipes were subjected to internal pressure in order to evaluate the effects of patch thickness, overlap angle and overlap length on the joint strength. Finally, the numerical analyses and experimental results show that the variation of the patch thickness, overlap length and overlap angle will change the stress distributions and strength of the adhesively repaired pipes.en_US
dc.identifier.doi10.1016/j.ijadhadh.2017.02.015
dc.identifier.endpage95en_US
dc.identifier.issn0143-7496
dc.identifier.issn1879-0127
dc.identifier.scopus2-s2.0-85013955929en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage88en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijadhadh.2017.02.015
dc.identifier.urihttps://hdl.handle.net/11616/97708
dc.identifier.volume75en_US
dc.identifier.wosWOS:000400039400010en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofInternational Journal of Adhesion and Adhesivesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPipeen_US
dc.subjectCracken_US
dc.subjectInternal pressureen_US
dc.subjectFinite elementsen_US
dc.subjectAdhesiveen_US
dc.titleMechanical behaviour of adhesively repaired pipes subject to internal pressureen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu