Effect of different heat treatments on magnetoelastic properties of Fe-based amorphous wire
Küçük Resim Yok
Tarih
2001
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Sa
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The field dependence of Young's modulus of Fe77.5Si7.5B15 amorphous ferromagnetic wires were studied in as-quenched state and after furnace, current and pulse annealing. In as-quenched state, the change in Young's modulus as a function of field is small due to induced large anisotropy during the quenching process. Annealing for short times is sufficient to remove most of the quenched stresses resulting in magnetic softening and large change in Young's modulus. Further furnace or current annealing leads to surface crystallization which develops an easy axis in the circumferential direction, but such an easy axis was not observed in pulse annealed samples. The temperature of current annealed samples were calculated from resistance-temperature curve and the temperature of pulse annealed samples were estimated from T-t curve, where T is the annealing temperature and t the annealing time to reach the minimum value of coercivity. (C) 2001 Elsevier Science B.V. All rights reserved.
Açıklama
10th International Conference on Rapidly Quenched and Metastable Materials (RQ10) -- AUG 23-27, 1999 -- BANGALORE, INDIA
Anahtar Kelimeler
heat treatment, annealing, Young's modulus
Kaynak
Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
WoS Q Değeri
N/A
Scopus Q Değeri
Q1
Cilt
304
