An Application of Explosive Metal Forming in Military Field: The Relationship Between Shaped Charge Jet Formation and Thickness Variation Along Liner Length of Conical Copper Liner

Basit Öğe Kaydı
dc.authoridAksoy, İshak Gökhan/0000-0002-8798-5847
dc.authorwosidAksoy, İshak Gökhan/AAU-1563-2020
dc.contributor.authorSen, Sadri
dc.contributor.authorAksoy, I. Gokhan
dc.date.accessioned2024-08-04T20:37:55Z
dc.date.available2024-08-04T20:37:55Z
dc.date.issued2013
dc.departmentİnönü Üniversitesien_US
dc.description.abstractShaped charges are very convenient in the formation of very intensive local forces required for penetration and demolition of high strength targets, important in military area. It is generally used to penetrate armored vehicles such as tanks and to demolish concrete fortifications, fuel vessels and bridge constructions, in mining and geophysics, e.g., petroleum research for hard rock penetration and cutting, also in welding and demolition works in industry. In this study, effects of wall thickness variation of the conical copper (CU-OFHC) liner in model group T1 and T2 are investigated. Wall thickness variation is taken into account from the center of the apex to the circular base edge in model group T1 and from the circular base edge to the center of apex in model group T2. In this sense, the relation between the variable thickness, and the geometry and pressure of the jet is investigated. Obtained results are evaluated to determine the stand-off distance between the shaped charge and target which is most important in jet performance. Thickness variation along the liner length changes the liner wall cross-sectional area and increases the liner total mass at both the model groups. Hence, the similar behavior is expected in the two model groups. Hence, the results do not show such a similar behavior between the two model groups. Consequently, It can be said that the dominant parameter is geometrical change, not increase in total mass. This also means that the mass distribution in the liner is determinative parameter in jet formation.en_US
dc.description.sponsorshipNational Science Foundation [TUBITAK-MAG-107M583]en_US
dc.description.sponsorshipThis work is fully supported by National Science Foundation(TUBITAK-MAG-107M583)en_US
dc.identifier.doi10.1007/s13369-013-0642-x
dc.identifier.endpage3562en_US
dc.identifier.issn1319-8025
dc.identifier.issn2191-4281
dc.identifier.issue12en_US
dc.identifier.scopus2-s2.0-84887302691en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage3551en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-013-0642-x
dc.identifier.urihttps://hdl.handle.net/11616/96269
dc.identifier.volume38en_US
dc.identifier.wosWOS:000326690500026en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectExplosive metal formingen_US
dc.subjectShaped chargesen_US
dc.subjectJet formationen_US
dc.subjectStand-off distanceen_US
dc.titleAn Application of Explosive Metal Forming in Military Field: The Relationship Between Shaped Charge Jet Formation and Thickness Variation Along Liner Length of Conical Copper Lineren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu