Microstructure and wear behaviour of Al/SiC composite coating on AlZn5.5MgCu alloy substrate at different sintering temperatures

Basit Öğe Kaydı
dc.contributor.authorBallikaya, Hasan
dc.date.accessioned2026-04-04T13:35:20Z
dc.date.available2026-04-04T13:35:20Z
dc.date.issued2024
dc.departmentİnönü Üniversitesi
dc.description.abstractIn recent years, significant research has been carried out for a long time on improving the mechanical properties of the surfaces of metallic materials with various surface coating methods. This study was conducted to investigate in detail the microstructure and wear behaviour properties of the coating, made by the hot press sintering method (HPSM), on AlZn5.5MgCu alloy. The coating layer was hot pressed for 25 min with Al+5%vol. SiC powder particles at sintering temperatures of 580, 600, and 620 degrees C under 120 MPa pressure. The microstructure of the coating produced at different sintering temperatures and the microstructures of the interface region and the substrate were analysed by optical microscopy (OM), Scanning Electron Microscopy and Energy Dispersive Spectroscopy (SEM-EDS), and X-ray diffraction (XRD). Microhardness values were also measured on the coating layer and the linear reciprocating wear test was applied. The microstructure results indicated a homogeneous distribution of SiC particles in the Al powder. Also, the mass loss reduced and the microhardness values significantly raised due to the increase in sintering temperature values. It was seen that with this method, the coating thickness amount could be made in accordance with the desired value.
dc.identifier.doi10.1007/s12046-024-02584-y
dc.identifier.issn0256-2499
dc.identifier.issn0973-7677
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85205890458
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1007/s12046-024-02584-y
dc.identifier.urihttps://hdl.handle.net/11616/109788
dc.identifier.volume49
dc.identifier.wosWOS:001326036300001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorBallikaya, Hasan
dc.language.isoen
dc.publisherSpringer India
dc.relation.ispartofSadhana-Academy Proceedings in Engineering Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250329
dc.subjectHot pressing sintering
dc.subjectAl/SiC
dc.subjectcoating
dc.subjectwear behaviour
dc.titleMicrostructure and wear behaviour of Al/SiC composite coating on AlZn5.5MgCu alloy substrate at different sintering temperatures
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu