Analysis and Optimization of the Performances of the Tandem Blade Radial Compressor Using the CFD

Basit Öğe Kaydı
dc.authoridParlak, Zekeriya/0000-0002-2487-0065
dc.contributor.authorSoylemez, Mustafa Erturk
dc.contributor.authorBehcet, Rasim
dc.contributor.authorParlak, Zekeriya
dc.date.accessioned2024-08-04T20:56:03Z
dc.date.available2024-08-04T20:56:03Z
dc.date.issued2024
dc.departmentİnönü Üniversitesien_US
dc.description.abstractCentrifugal compressors are frequently used in both military and commercial areas because they can be easily manufactured and reach high-pressure compression ratios. The factor that limits the performance and operating range of compressors is flow instability. Many ideas have been put forward for performance improvement, but tandem blade radial compressors, which do not require an extra air system, have attracted the most interest. In this study, computational fluid dynamics (CFD) analyses were carried out on various parameters of the tandem blade (TB) radial compressor, and an optimization study was carried out to find the best design using a genetic algorithm on a whole operating curve. It was investigated how these parameters affected the efficiency and total pressure ratio between the determined lower and upper limits. The numerical analyses of the optimum design obtained as a result of the iterations were carried out. As a result of the iterations, three optimum designs were obtained and numerical analysis was carried out according to one of them, and then they were compared with the results in the literature. The general agreement of computational fluid dynamics and the literature data served as a validation for the computational approach. The error rates between the numerical analysis results and the experimental results in the literature were calculated for different flow rates and were found to be 1.98% as the highest and 0.35 as the lowest. The work carried out in this article will provide a valuable reference for future advanced tandem blade compressor designs.en_US
dc.identifier.doi10.3390/app14104256
dc.identifier.issn2076-3417
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85194184141en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.3390/app14104256
dc.identifier.urihttps://hdl.handle.net/11616/102015
dc.identifier.volume14en_US
dc.identifier.wosWOS:001232744300001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherMdpien_US
dc.relation.ispartofApplied Sciences-Baselen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectradial compressoren_US
dc.subjecttandem bladeen_US
dc.subjectmodellingen_US
dc.subjectoptimizationen_US
dc.subjectCFDen_US
dc.titleAnalysis and Optimization of the Performances of the Tandem Blade Radial Compressor Using the CFDen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu