Mechanical characterization of composite pipe systems joined using different radii pipes subject to internal pressure

Basit Öğe Kaydı
dc.authoridSÜLÜ, İsmail Yasin/0000-0002-2648-6294
dc.authoridTEMİZ, ŞEMSETTİN/0000-0002-6737-3720
dc.authorwosidSÜLÜ, İsmail Yasin/ABH-1342-2020
dc.authorwosidTEMİZ, ŞEMSETTİN/ABG-7809-2020
dc.contributor.authorSulu, Ismail Yasin
dc.contributor.authorTemiz, Semsettin
dc.date.accessioned2024-08-04T20:49:05Z
dc.date.available2024-08-04T20:49:05Z
dc.date.issued2023
dc.departmentİnönü Üniversitesien_US
dc.description.abstractFailure tests for internal pressurized composite pipe system joined by using different radii pipes were carried out by the finite element method and experimental tests. The composite pipes were produced from E glass fiber/epoxy. DP410 and DP490 type adhesives were used to join the composite pipes. The numerical results and experimental results were compared. It was shown that the numerical analyzes results were close to experimental results. Tangential, radial, axial, and shear stress values on composite pipes and adhesive layers were obtained via numerical analyses in the radial direction. Additionally, the von Mises stress distributions were obtained on the adhesive. The effects of adhesive layer lengths, adhesives types, and orientation angle on the effect of the joint zone were investigated.en_US
dc.identifier.doi10.1080/15397734.2020.1848590
dc.identifier.endpage582en_US
dc.identifier.issn1539-7734
dc.identifier.issn1539-7742
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85096540539en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage566en_US
dc.identifier.urihttps://doi.org/10.1080/15397734.2020.1848590
dc.identifier.urihttps://hdl.handle.net/11616/99641
dc.identifier.volume51en_US
dc.identifier.wosWOS:000592026400001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofMechanics Based Design of Structures and Machinesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAdhesiveen_US
dc.subjectstress analysisen_US
dc.subjectjoint designen_US
dc.subjectcomposite pipesen_US
dc.subjectfinite element analysisen_US
dc.titleMechanical characterization of composite pipe systems joined using different radii pipes subject to internal pressureen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu