Effect of slope in S-type adhesive bonding under axial loading

Basit Öğe Kaydı
dc.authoridAYAZ, Yaşar/0000-0002-1089-0700
dc.authorwosidAYAZ, Yaşar/ABG-8694-2020
dc.contributor.authorAyaz, Yasar
dc.date.accessioned2024-08-04T20:46:00Z
dc.date.available2024-08-04T20:46:00Z
dc.date.issued2019
dc.departmentİnönü Üniversitesien_US
dc.description.abstractContemporary industrial practice takes wide advantage of adhesive materials and adhesive bonding techniques, notably in the aviation and automotive industries. The geometry of bonded joints may vary considerably, and this paper explores the potential advantages of S-shaped lapped profiles with particular reference to the slope of the S. This aspect of the joint offers improvements in the area of adhering surfaces and provides superior bonding in comparison with conventional single lap joints. The study examines 30-mm overlapping specimen joints made from 100-mm-length by 25-mm-width AA 2024-T3 aluminium alloy sheets, having alternative thicknesses of 6.5, 10 and 13.5 mm. It also features three alternative radii for the profiles, thus generating different slopes for the S-shapes. The specimen joints were bonded using acrylic adhesive DP 810, modelled using finite element analysis and subjected to physical confirmation of the analysis results. The results show that a decrease in profile radius correlates with an increase in failure load; that an increase in profile radius lessens the effect of thickness on damage load and that bending moment is absent from the adhesive bonding profile of the S-shape.en_US
dc.identifier.doi10.1007/s40194-019-00756-7
dc.identifier.endpage1448en_US
dc.identifier.issn0043-2288
dc.identifier.issn1878-6669
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85066997441en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1443en_US
dc.identifier.urihttps://doi.org/10.1007/s40194-019-00756-7
dc.identifier.urihttps://hdl.handle.net/11616/98824
dc.identifier.volume63en_US
dc.identifier.wosWOS:000482459300024en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofWelding in The Worlden_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAdhesiveen_US
dc.subjectAdhesionen_US
dc.subjectBonding typeen_US
dc.subjectS-type single-lap jointen_US
dc.subjectFinite element analysisen_US
dc.titleEffect of slope in S-type adhesive bonding under axial loadingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu