ANALYZING THE EFFECTS OF DIFFERENT TOOL PATHS ON FORM ERRORS IN THE MILLING OF FREEFORM SURFACES
Küçük Resim Yok
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Yildiz Technical Univ
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Machining of free-form surfaces is an important place in terms of design and performance in transportation, electronics and aeronautical industry. Problems such as form error and surface roughness were frequently encountered in the manufacture of these surfaces. For the solution of the problems, reprocessing is done, which causes time and resource loss. To eliminate these losses, the parts must be produced in the desired quality at one time. In order to find out the causes of form errors and to remove the adverse effects, the distribution on the surface must be determined correctly. Form errors should be examined in a way to cover the point, region and the whole part. In this study, a surface created with B-Spline curve has been processed with different tool paths. Surfaces were scanned in 3D and form errors were determined. Point, regional and whole parts are examined and the tool path that creates minimum form error is determined.
Açıklama
Anahtar Kelimeler
B-spline curve, free-form surfaces, form error
Kaynak
Sigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisi
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
38
Sayı
3
