ANALYZING THE EFFECTS OF DIFFERENT TOOL PATHS ON FORM ERRORS IN THE MILLING OF FREEFORM SURFACES

Basit Öğe Kaydı
dc.authoridbahçe, erkan/0000-0001-5389-5571
dc.authoridÖzdemir, Burak/0000-0002-5870-0398
dc.authorwosidbahçe, erkan/AAQ-3631-2020
dc.authorwosidÖzdemir, Burak/AAB-6654-2020
dc.contributor.authorBahce, Erkan
dc.contributor.authorOzdemir, Burak
dc.date.accessioned2024-08-04T20:53:31Z
dc.date.available2024-08-04T20:53:31Z
dc.date.issued2020
dc.departmentİnönü Üniversitesien_US
dc.description.abstractMachining of free-form surfaces is an important place in terms of design and performance in transportation, electronics and aeronautical industry. Problems such as form error and surface roughness were frequently encountered in the manufacture of these surfaces. For the solution of the problems, reprocessing is done, which causes time and resource loss. To eliminate these losses, the parts must be produced in the desired quality at one time. In order to find out the causes of form errors and to remove the adverse effects, the distribution on the surface must be determined correctly. Form errors should be examined in a way to cover the point, region and the whole part. In this study, a surface created with B-Spline curve has been processed with different tool paths. Surfaces were scanned in 3D and form errors were determined. Point, regional and whole parts are examined and the tool path that creates minimum form error is determined.en_US
dc.identifier.endpage1332en_US
dc.identifier.issn1304-7205
dc.identifier.issn1304-7191
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85149856797en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage1321en_US
dc.identifier.urihttps://hdl.handle.net/11616/101219
dc.identifier.volume38en_US
dc.identifier.wosWOS:000575787500018en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherYildiz Technical Univen_US
dc.relation.ispartofSigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectB-spline curveen_US
dc.subjectfree-form surfacesen_US
dc.subjectform erroren_US
dc.titleANALYZING THE EFFECTS OF DIFFERENT TOOL PATHS ON FORM ERRORS IN THE MILLING OF FREEFORM SURFACESen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu