Evaluation of marginal and internal adaptation of hybrid and nanoceramic systems with microcomputed tomography: An in vitro study

Küçük Resim Yok

Tarih

2017

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Mosby-Elsevier

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

Statement of problem. The accuracy of recently introduced chairside computer-aided design and computer-aided manufacturing (CAD-CAM) blocks is not well established, and marginal integrity and internal adaptation are not known. Purpose. The purpose of this in vitro study was to evaluate the marginal and internal adaptation of hybrid and nanoceramics using microcomputed tomography (mu-CT). Material and methods. The marginal and internal adaptation of 3 polymer-infiltrated ceramic network (PICN) materials (Vita Enamic EVE]; Lava Ultimate [LU]; Vita Suprinity [VS]) were compared with lithium disilicate (IPS e.max.CAD, IPS). Ninety-six specimens (48 dies and 48 crowns) were prepared (n=12 each group) using a chairside CAD-CAM system. The restorations were scanned with mu-CT, with 160 measurements made for each crown, and used in 2-dimensional (2D) analysis. The marginal adaptation of marginal discrepancy (MD), absolute marginal discrepancy (AMD), internal adaptation of shoulder area (SA), axial space (AS), and occlusal space (OS) were compared using appropriate statistical analysis methods (alpha=.05). Cement volumes were compared using 3D analysis. Results. The IPS blocks showed higher MD (130 mu m), AMD (156 mu m), SA (111 mu m) (P<.05), AS (52 mu m), and OS (192 mu m) than the other blocks (P<.01). The adaptation values of VS were significantly lower than those of the IPS block (P<.05). The adaption values of the LU and VE blocks were significantly lower than those of others (P<.01) but were statistically similar to one another (P>.05). IPS had the largest cement space at 18 mm(3) (P<.01). Conclusions. The marginal and internal adaptation values were within a clinically acceptable range for all 3 hybrids and nanoceramics tested.

Açıklama

Anahtar Kelimeler

Finish Line Curvature, Digital Impressions, Cad/Cam Systems, Ceramic Crowns, Fit, Restorations, Copings, Discrepancies, Technologies, Scanner

Kaynak

Journal of Prosthetic Dentistry

WoS Q Değeri

Q1

Scopus Q Değeri

Q1

Cilt

118

Sayı

2

Künye