Self-etching adesiv sistemlerin anti-bakteriyel özellikleri
Yükleniyor...
Dosyalar
Tarih
2014
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
İnönü Üniversitesi Sağlık Bilimleri Dergisi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmanın amacı, Direk Kontakt Testi (DKT) kullanılarak Self Etching Adeziv sistemlerinin antibakteriyel etkinliklerinin
değerlendirilmesidir. DKT için, 96 adet mikrotitre plaklar (n=8), Self Etching Adesiv sistemler (Clearfil SE Protect, Transbond Plus Self
Etching Primer) ve Transbond XT adesiv sistemlerle kaplandı. Kontrol materyali olarak Kalzinol (çinko oksit ojenol) kullanıldı.
Streptococcus mutans süspansiyonu örneklerin yüzey alanına uygulanarak 37 oC de bir saat bekletildi. Bakteri üremesi, ısı kontrollü
spektrofotometre ile 16 saat boyunca gözlendi. Her bir kuyucuktaki üremenin kinetiği her 30 dakika da bir 650 nm düzeyinde sürekli olarak
kaydedildi.Verilerin, one-way ANOVA testi ile analizi yapılmıştır (p<0.05). DKT sonuçlarına göre test materyalleri (Clearfil SE Protect ve
Transbond Plus Self Etching Primer) bakteri üremesini engellemiştir. Çalışmamızda, Clearfil SE Protect ve Transbond Plus Self Etching
Primer antibakteriyel özellikler göstermiştir.
The purpose of this study was to evaluate the antibacterial properties of self-etching adhesive systems using a direct contact test (DCT). For the DCT, wells (n=8) of 96-microtitre plates were coated with the self-etching adhesive systems (Clearfil SE Protect, Transbond Plus Self Etching Primer) and Transbond XT adhesive, and with control material (Kalzinol). A Streptococcus mutans suspension was placed on the surface of each specimen for 1 hour at 37C. Bacterial growth was monitored for 16 hours with a temperature-controlled microplate spectrophotometer. The kinetics of the outgrowth in each well were continuously recorded at 650 nm every 30 minutes. The data were analyzed by one-way ANOVA (p< 0.05). The results of the DCT showed that Clearfil SE Protect and Transbond Plus Self-Etching Primer exhibited potent antibacterial activity. Within the limitations of this study, Clearfil SE Protect and Transbond Plus Self-Etching Primer showed antibacterial properties.
The purpose of this study was to evaluate the antibacterial properties of self-etching adhesive systems using a direct contact test (DCT). For the DCT, wells (n=8) of 96-microtitre plates were coated with the self-etching adhesive systems (Clearfil SE Protect, Transbond Plus Self Etching Primer) and Transbond XT adhesive, and with control material (Kalzinol). A Streptococcus mutans suspension was placed on the surface of each specimen for 1 hour at 37C. Bacterial growth was monitored for 16 hours with a temperature-controlled microplate spectrophotometer. The kinetics of the outgrowth in each well were continuously recorded at 650 nm every 30 minutes. The data were analyzed by one-way ANOVA (p< 0.05). The results of the DCT showed that Clearfil SE Protect and Transbond Plus Self-Etching Primer exhibited potent antibacterial activity. Within the limitations of this study, Clearfil SE Protect and Transbond Plus Self-Etching Primer showed antibacterial properties.
Açıklama
İnönü Üniversitesi Sağlık Bilimleri Dergisi 2014; 3 (1): 16-21
Anahtar Kelimeler
Self Etching Adesiv Sistemler, Antibakteriyel Özellik, The Direct Contact Test (DCT), Self-Etching Adesiv Systems, Antibacterial Properties
Kaynak
İnönü Üniversitesi Sağlık Bilimleri Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
3
Sayı
1
Künye
Öztürk, F. Yalçın, M. Arslan, U. Ersöz, M. (2014). Self-etching adesiv sistemlerin anti-bakteriyel özellikleri. İnönü Üniversitesi Sağlık Bilimleri Dergisi 2014; 3 (1): 16-21 ss.
