Comparison of Hashin and Puck criterions for failure behavior of pin loaded composite plates

Basit Öğe Kaydı
dc.authorscopusid58947771700
dc.authorscopusid15065341800
dc.authorscopusid57219151459
dc.authorscopusid58390341900
dc.contributor.authorDogan C.
dc.contributor.authorKaman M.O.
dc.contributor.authorErdem S.
dc.contributor.authorAlbayrak M.
dc.date.accessioned2024-08-04T19:59:34Z
dc.date.available2024-08-04T19:59:34Z
dc.date.issued2024
dc.departmentİnönü Üniversitesien_US
dc.description.abstractIn this study, the failure behavior of carbon fiber-reinforced pin-jointed composite plates were analyzed for different criteria. For this purpose, composite plates with a single and double pin joints were prepared from four layers carbon fiber composites. The effect of pin number, pin position on plate damage load and type was investigated experimentally and numerically under the tensile test. Numerically, progressive damage analysis was performed using Hashin and Puck failure criteria, and the approach rates to the experimental results were determined. It was observed that the experimental results obtained for single pin joint composites and the numerical data obtained using the Puck damage criterion were at least 87 % compatible, and this rate was determined as 85 % for the Hashin failure criterion. For the double pin jointed composites, it was seen that the experimental results and the results of the Puck damage criterion were compatible with at least 90 %, and this rate was obtained as 84 % for the Hashin failure criterion. The dominant damage type seen in the specimen is matrix shear and fiber compression according to the Hashin damage criterion, inter fiber failure in transverse tension for Puck. © 2024 Wiley-VCH GmbH.en_US
dc.identifier.doi10.1002/mawe.202300104
dc.identifier.endpage329en_US
dc.identifier.issn0933-5137
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85188248317en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage314en_US
dc.identifier.urihttps://doi.org/10.1002/mawe.202300104
dc.identifier.urihttps://hdl.handle.net/11616/90732
dc.identifier.volume55en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherJohn Wiley and Sons Incen_US
dc.relation.ispartofMaterialwissenschaft und Werkstofftechniken_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecthashinen_US
dc.subjectlaminated compositeen_US
dc.subjectpin jointen_US
dc.subjectprogressive failure analysisen_US
dc.subjectPucken_US
dc.titleComparison of Hashin and Puck criterions for failure behavior of pin loaded composite platesen_US
dc.title.alternativeVergleich der Hashin- und Puck-Kriterien für das Versagensverhalten von stiftbelasteten Verbundwerkstoffplattenen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu