Fabrication of (BiGaPb)2Sr2Ca2Cu3O10+y glass-ceramic superconductor rods
Küçük Resim Yok
Tarih
1996
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Plenum Publ Corp, New York, NY, United States
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Glass samples with a nominal composition of Bi1.2Ga0.4Pb0.4Sr2Ca2Cu3O10+y were prepared as rods having a diameter of 13 mm and 20 cm long by melt casting technique. Sintering process was performed by applying a direct current to the glass rods. Three different current application stages were used and crystallization of the glass rods were obtained. The XRD studies of the material showed that crystallized grains were preferably c-axis oriented. The best Tc was obtained at 107 K and Tzero was obtained at 101 K. These results were also confirmed by the D.C. Susceptibility measurements. After the optimum processing condition the maximum transport current density was found to be 9700 A/cm2 at 4.2 K.
Açıklama
Proceedings of the 1996 International Conference on Physics and Chemistry of Molecular and Oxide Superconductors, MOS'96 -- 2 August 1996 through 6 August 1996 -- Karlsruhe, Ger -- 45850
Anahtar Kelimeler
Bismuth compounds, Ceramic materials, Critical current density (superconductivity), Crystallization, Glass, Magnetic permeability measurement, Oxide superconductors, Sintering, X ray diffraction analysis, Bismuth gallium lead strontium calcium copper oxide, Glass rods, Maximum transport current density, Melt casting technique, High temperature superconductors
Kaynak
Journal of low temperature physics
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
105
Sayı
5 -6 pt 2
