Evaluation of tensile strength of different esthetic coping materials to Ti-base and monolithic zirconia crowns
Küçük Resim Yok
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Taylor & Francis Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This study evaluated the tensile strength of three aesthetic abutment materials at two different angulations (0 and 15 degrees) to Ti-base and monolithic zirconia crowns. Prefabricated polyvinylidene difluoride (Medentika Implant) abutments were obtained and zirconia (Kingch) and polyetheretherketone (Ceramill) copings were manufactured using a computer-aided design/computer-aided manufacturing system (n = 12). Bonding surfaces of the copings and Ti-bases were air-abraded with alumina and then metal primer was applied. Self-adhesive resin cement (Multilink Hybrid Abutment) was used for cementation of copings to Ti-base. The bonding surfaces of the monolithic zirconia crowns (Upcera ST ML) were air-abraded and crowns were cemented using self-adhesive cement (seT PP). Data were analyzed using Kruskal-Wallis and Mann-Whitney U tests. No significant difference was found in the tensile strength of abutment to the crown interface for 0 degrees tapered abutments (p > 0.05). Regarding 15 degrees tapered abutments, the highest tensile strength values were obtained with zirconia abutments (p < 0.05). The tensile strength of monolithic zirconia crowns was lower than the restorations used in routine clinical practice.
Açıklama
Anahtar Kelimeler
Abutment, adhesion, bond strength, monolithic zirconia, polyetheretherketone, polyvinylidene difluoride, zirconia
Kaynak
Journal of Adhesion Science and Technology
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
36
Sayı
8
