Determination of mechanical and tribological properties of vacuum sintered hybrid reinforced Al-4Cu composites
Küçük Resim Yok
Tarih
2024
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Sage Publications Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This study aims to modernize commonly preferred hybrid aluminum composites in the automotive and defense industries. For this purpose, Al-4Cu/B4C-SiC hybrid composites were manufactured using the hot pressing method and their microstructure, mechanical, and tribological properties were investigated. SEM/EDS analyses of the samples were conducted to examine morphological characteristics. Hardness, relative density, and three-point bending tests were performed on the produced samples. Additionally, wear tests were conducted under dry sliding conditions and different loads (5-10-15 N) to investigate tribological properties. The addition of hybrid reinforcements resulted in high hardness (88.54 HB) and relative density (98.83%) values. The highest bending stress (556.9 MPa) was observed in sample AC-4 (Al-4Cu/2B4C-2SiC). The lowest mass loss (1.1 x 10-3 g) was encountered in sample AC-6 (Al-4Cu/6B4C-6SiC), where all reinforcements were present together. Plastic deformation, oxidation, and residual wear mechanisms were identified on the worn surfaces of the samples. Consequently, the addition of hybrid reinforcements to Al-4Cu composites shows promising potential in enhancing the mechanical and tribological performance of the composites.
Açıklama
Anahtar Kelimeler
Novel hybrid composites, microstructure, mechanical properties, tribology
Kaynak
Journal of Composite Materials
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
58
Sayı
26
